Beko Dishwasher DIN35321 Manual

The Beko DIN35321 is a freestanding dishwasher with a 14-place setting capacity, energy efficiency class A, multiple wash programs, delay start function, child lock, and salt and rinse aid indicators. It features a stainless steel interior, adjustable upper basket, and cutlery basket. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser, and inlet/drain hoses.

Feature	Description
Capacity	14 standard place settings
Energy Class	A (energy efficient)
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	Programmable up to 24 hours
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Adjustable Upper Basket	Height adjustable for taller items
Half Load Option	Saves water and energy for smaller loads
Acoustic Signal	Beeps when program ends

Installation

Unpack and inspect contents. Ensure location is near water inlet, drain, and power outlet.

Position the dishwasher: Place on level floor near sink, leaving space for door to open fully.
Connect water supply: Attach inlet hose to cold water tap (ensure filter is clean).
Connect drain hose: Secure to sink drain or standpipe using provided clamp.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet to ensure stability.

WARNING! Do not kink hoses. Ensure electrical plug is accessible. Follow local plumbing codes.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out any brackets or foam from interior.
Fill salt container: Unscrew cap, add 1 kg of dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX mark, close lid.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness (see manual chart).

CAUTION! Use only dishwasher salt and rinse aid. Do not mix with detergents.

Specifications

Model: DIN35321
Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 10 liters per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Power: 2000 W
Programs: Auto, Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Rinse

Controls and Settings

Control Panel: ON/OFF button, program selector, delay start, child lock, start/pause.

Programs: Auto (senses soil), Intensive (tough stains), Eco (energy saving), Quick (light soil), Glass (delicate), Rinse (no detergent).

Settings: Use ON/OFF and program buttons to set water hardness (1-5). Delay Start: Press delay button, then use program selector to set hours (1-24). Child Lock: Press and hold delay and start buttons for 3 seconds. Indicators: Salt (red light) and rinse aid (green light) show when refill is needed.

Loading the Dishwasher

For optimal cleaning, load correctly.

Scrape off large food residues.
Place plates, bowls in lower basket facing center.
Adjust upper basket height if needed for cups or pans.
Place glasses, mugs in upper basket, upside down.
Put cutlery in basket with handles down (except sharp knives).
Ensure spray arms can rotate freely.

Tip: Do not overload. Place delicate items in upper basket away from heating element.

Using Detergents and Additives

Use only dishwasher-specific products.

Detergent: Fill dispenser according to soil level (25-30 g for normal). Use tablets or powder.
Rinse Aid: Refill when indicator light is on; adjust dosage (1-6) for spot-free drying.
Salt: Refill when salt indicator lights; ensures soft water for better cleaning.
Combined detergents (3-in-1): Follow package instructions; may reduce need for separate rinse aid.

WARNING! Do not use hand soap, laundry detergent, or abrasive cleaners. Keep products out of reach of children.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove lower basket, twist filter assembly, rinse under water weekly.
Clean spray arms: Check for blockages, rinse holes.
Wipe door seals: Use damp cloth to remove debris.
Descale: Run empty cycle with dishwasher cleaner every 2 months if in hard water area.
Exterior: Wipe with soft, damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use steam cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2017. Waste electrical products must not be disposed of with household waste; recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check plug, fuse, ensure door closed, deactivate child lock.
Poor cleaning results	Loading, detergent, filter	Reload dishes properly, use correct detergent amount, clean filter.
Water not draining	Drain hose, filter blockage	Check hose for kinks, clean filter, ensure drain height is correct.
Leaking water	Door seal, hose connections	Check door seal for debris, tighten hose connections, ensure level.
Noise during operation	Spray arm, foreign objects	Ensure spray arms rotate freely, remove objects from pump area.
Salt indicator stays on	Salt container empty	Refill with dishwasher salt, run short program to flush.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com