Beko Dishwasher DIN36420 Manual

The Beko DIN36420 is a freestanding dishwasher featuring multiple wash programs, energy efficiency, adjustable upper basket, salt and rinse aid indicators, child lock, delay start, and half-load option. It is designed for standard household use with a 12-place setting capacity. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

FeatureDescription
Wash ProgramsAuto, Intensive, Eco, Quick, Glass, Rinse
Delay StartProgram start delay from 1 to 24 hours
Half LoadOption for washing fewer dishes to save water and energy
Child LockLocks control panel to prevent accidental changes
Adjustable Upper BasketHeight can be adjusted to accommodate taller items
Salt & Rinse Aid IndicatorsLED indicators alert when refills are needed
Digital DisplayShows remaining time, program, and status
Energy ClassA++ for energy efficiency
AquaStopProtection against water leaks

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place into sink or standpipe (min height 40 cm, max 100 cm).
  3. Level the appliance: Adjust feet to ensure dishwasher is stable and level.
  4. Plug into grounded power outlet.

WARNING! Do not install near heat sources. Ensure water and electrical connections are secure to prevent leaks and hazards.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, unscrew salt cap, fill with special dishwasher salt (first use: add 1 litre of water).
  2. Fill rinse aid dispenser: Open lid, fill to MAX line, close securely.
  3. Run an empty wash: Select Intensive program without dishes to clean interior and remove manufacturing residues.
  4. Set water hardness: Use program buttons to set according to local water hardness (see manual table).

CAUTION! Use only dishwasher salt, not table salt. Overfilling rinse aid can cause excess foaming.

Specifications

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Program Guide:

Settings: Use combination of buttons to set water hardness, activate child lock, or reset filter indicator.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: For pots, pans, plates, and larger items.
  3. Upper basket: For glasses, cups, saucers, and smaller plates.
  4. Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
  5. Adjust upper basket height if needed for tall items.
  6. Ensure spray arms can rotate freely; do not block with large items.

Tip: Place heavily soiled items facing the centre. Do not overload baskets.

Using Detergents and Additives

Use only dishwasher-specific products.

  1. Detergent: Fill main detergent dispenser (compartment marked). Use tablet, powder, or gel. For short programs, use half the amount.
  2. Rinse Aid: Automatically dispensed during final rinse to improve drying and prevent spots. Refill when indicator light is on.
  3. Salt: Regenerates the water softener. Refill when salt indicator light is on (approx. every 2-3 months).

WARNING! Do not mix different detergent types. Keep all additives out of reach of children.

Care & Cleaning

Regular maintenance ensures longevity.

  1. Filter cleaning: Twist and lift out filter assembly weekly. Rinse under tap to remove food particles.
  2. Spray arms: Check monthly for clogs. Remove by pulling upwards and rinse holes.
  3. Door seals: Wipe with damp cloth to remove residue.
  4. Exterior: Clean with soft, damp cloth. Do not use abrasive cleaners.
  5. Run empty hot wash monthly with dishwasher cleaner or vinegar to remove grease and odours.

CAUTION! Unplug before any maintenance. Do not use steam cleaners.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of packaging material. For support, visit www.beko.com or contact your local Beko service centre.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower, door, child lockCheck plug/power; ensure door closed securely; deactivate child lock.
Poor cleaning resultsLoading, detergent, filterCheck loading; use correct amount of fresh detergent; clean filter.
Water not drainingDrain hose, filter blockageCheck hose for kinks; clean filter; ensure drain height correct.
Leaking waterDoor seal, hose connectionsCheck door seal for damage; ensure hoses are tight and undamaged.
Unusual noiseSpray arm, foreign objectCheck spray arms rotate freely; remove any foreign objects from pump area.
Salt/Rinse Aid light onLow levelRefill salt container or rinse aid dispenser.
Display shows error codeVarious faultsConsult manual error code list; try resetting by turning power off/on.

Reset: Turn off at mains for 5 minutes, then restart.

Service: For persistent issues, contact authorised Beko service. Have model and serial numbers ready.

Beko Dishwasher DIN36420 Manual © - All Rights Reserved 2025