Beko Dishwasher DIN36420AD Manual

The Beko DIN36420AD is a freestanding dishwasher with 14 place settings, A++ energy rating, 49 dB noise level, and multiple wash programs. It features a stainless steel interior, digital display, delay start, half load option, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, digital display, and control panel.

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

1. Remove transit materials: Take out all polystyrene blocks and transit bolts.
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Place hose in sink or connect to waste pipe (min height 40 cm).
4. Level the appliance: Adjust feet until dishwasher is perfectly level.
5. Plug into grounded power outlet.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher for operation.

1. Fill salt container: Remove lower basket, unscrew salt cap, fill with 1 kg dishwasher salt.
2. Fill rinse aid: Open rinse aid compartment, fill to MAX line with rinse aid liquid.
3. Run empty wash: Select Intensive program without dishes to clean interior.
4. Adjust water hardness: Set hardness level according to local water supply (1-5).
5. Load detergent: Add dishwasher detergent to main wash compartment.

CAUTION! Use only dishwasher salt in salt container. Regular salt will damage the appliance.

Specifications

• Model: DIN36420AD
• Type: Freestanding dishwasher
• Capacity: 14 place settings
• Energy Consumption: 0.83 kWh per cycle (Eco program)
• Water Consumption: 9.5 liters per cycle (Eco program)
• Noise Level: 49 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Voltage: 220-240V, 50Hz
• Power: 2000W
• Programs: 8 wash programs + 4 options
• Warranty: 2 years manufacturer warranty

Controls and Settings

Control Panel: POWER button, PROGRAM selector, OPTIONS buttons, START/PAUSE, DELAY START, CHILD LOCK.

Programs: Intensive (70°C), Auto (45-65°C), Eco (50°C), Quick (58°C), Glass (40°C), Pre-Rinse, 90 Minute, Soak.

Options: Half Load, Extra Dry, Delay Start (1-24h), Extra Quiet.

Display Icons: Salt indicator, Rinse aid indicator, Child lock, Program progress, Remaining time.

Settings Menu: Access by holding PROGRAM + OPTIONS for 3 seconds to adjust: Water hardness (1-5), Rinse aid dosage (1-5), Buzzer on/off, Reset to factory settings.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

1. Scrape off large food residues before loading.
2. Lower basket: Pots, pans, lids, plates (facing center).
3. Upper basket: Glasses, cups, small plates, bowls.
4. Cutlery basket: Knives (handles up), spoons, forks (mixed orientation).
5. Adjust upper basket: Can be raised/lowered for tall items.
6. Fold-down spikes: Adjust for different plate sizes.
7. Ensure spray arms can rotate freely.

Tip: Do not overload. Water must reach all surfaces for proper cleaning.

Using Wash Programs

Select program based on soil level and dish type.

1. Turn on: Press POWER button.
2. Load dishes: Follow loading guidelines.
3. Add detergent: Fill main wash compartment; use pre-wash for heavily soiled loads.
4. Select program: Turn PROGRAM selector to desired program.
5. Add options: Press OPTION buttons as needed (Half Load, Extra Dry, etc.).
6. Start: Press START/PAUSE; door locks automatically.
7. Delay start: Press DELAY, then +/- to set hours, then START.
8. Pause: Press START/PAUSE during cycle to add forgotten items.
9. End of cycle: Buzzer sounds; door unlocks after cool-down period.

WARNING! Do not open door during hot wash phases. Steam may cause burns.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Clean filters: Remove lower basket, twist filter assembly counterclockwise, rinse under water weekly.
2. Clean spray arms: Remove by pulling upward, check holes for blockages monthly.
3. Check salt level: Refill when salt indicator light comes on (approx. every 20 cycles).
4. Check rinse aid: Refill when rinse aid indicator light comes on.
5. Clean door seals: Wipe with damp cloth to remove food residues.
6. Descale: Run empty with citric acid or dishwasher cleaner every 3 months.
7. Clean exterior: Use mild detergent and soft cloth; never use abrasive cleaners.

CAUTION! Unplug before maintenance. Never use sharp objects to clean spray arm holes.

Regulatory Information

CE marked: Complies with European safety standards. WEEE directive: Do not dispose with household waste; take to designated collection point. Energy label: A++ rating according to EU regulation 1059/2010. For UK models: Complies with BS EN 50242. Manufacturer: Beko PLC, 1 Greenhill Crescent, Watford, WD18 8QU. For support, visit www.beko.co.uk or contact 0333 207 9710.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. For persistent errors, contact service.

Service: 0333 207 9710; www.beko.co.uk