Beko Dishwasher DIN36430 Manual

The Beko DIN36430 is a freestanding dishwasher with a 14-place setting capacity, featuring multiple wash programs, energy efficiency class A, delay start, half load option, child lock, salt and rinse aid indicators, and aqua-stop protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 8. Maintenance and Cleaning 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

Feature	Description
Capacity	14 place settings
Energy Class	A (Energy efficient)
Programs	Auto, Intensive, Eco, Quick, Glass, Half Load
Delay Start	1-24 hours delay timer
Child Lock	Prevents accidental program changes
AquaStop	Protection against water leaks
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Display	Digital display with remaining time
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or dedicated drain pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging inside baskets.
Fill salt container: Add water softener salt (only for hard water areas).
Fill rinse aid dispenser: Pour rinse aid up to MAX mark.
Run initial wash: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness.

CAUTION! Use only dishwasher salt, not table salt. Ensure power is off during setup.

Specifications

Model: DIN36430
Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 10 liters per cycle (Eco program)
Noise Level: 49 dB(A)
Programs: 6 main programs + 4 options
Power Supply: 220-240V, 50Hz
Weight: 42 kg
Warranty: 2 years standard

Controls and Settings

Control Panel: ON/OFF button, program selector, delay timer, start/pause, half load, child lock.

Programs: Auto (55-65°C), Intensive (70°C), Eco (50°C), Quick (45°C, 30 min), Glass (40°C), Half Load.

Options: Delay Start (1-24h), Extra Dry, Extra Quiet, Intensive Zone.

Indicators: Salt, Rinse Aid, End of cycle, Door open.

Child Lock: Press and hold Start for 3 seconds to activate/deactivate.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Plates, pots, pans (face center).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Knives, forks, spoons (handles down, mixed types).
Ensure items do not block spray arms or detergent dispenser.

Tip: Place delicate items in upper basket, heavily soiled items facing center.

Using Detergents and Additives

Use only dishwasher-specific products.

Detergent: Add to main wash compartment (15-25g depending on soil level).
Rinse Aid: Fill dispenser, adjust dosage (1-6) based on water spots.
Salt: Fill only if water hardness > 4°dH. Regenerates water softener.
Combined tablets: Place in main wash compartment (do not use with extra salt/rinse aid).

WARNING! Do not use regular soap or washing powder. Keep detergents out of children's reach.

Maintenance and Cleaning

Regular maintenance ensures longevity.

Clean filters weekly: Remove lower basket, twist out filter assembly, rinse under water.
Clean spray arms monthly: Check for blockages, rinse holes.
Wipe door seals: Use damp cloth to remove debris.
Descale annually: Run empty cycle with dishwasher cleaner.
Check inlet hose: Inspect for cracks every 6 months.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Care & Cleaning

Exterior: Wipe with damp cloth and mild detergent. Interior: Run empty hot cycle monthly.

CAUTION! Do not use steam cleaners, solvents, or abrasive pads on surfaces.

Regulatory Information

CE compliant. WEEE directive: Do not dispose with household waste. Energy label according to EU regulation 2019/2017. For support, visit www.beko.com or contact 0800 497 0707 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug; ensure door closed properly; check circuit breaker.
Poor cleaning results	Loading/detergent	Rearrange dishes; check filter; use correct detergent amount.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height min 40 cm.
Salt indicator blinking	Low salt	Refill salt container; run short program to flush system.
Leaking water	Hoses/door seal	Tighten connections; check door seal for debris; ensure level.
Unusual noise	Spray arm/dishes	Check for obstructed spray arm; ensure dishes not touching arms.

Reset: Unplug for 5 minutes, then restart.

Service: 0800 497 0707; www.beko.com