BEKO Dishwasher DIS 1520 N Manual

The BEKO DIS 1520 N is a freestanding dishwasher with a capacity of 12 place settings, featuring 6 wash programs, energy class A, delay start function, child lock, salt and rinse aid indicators, and adjustable upper basket. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser.

FeatureDescription
Wash Programs6 programs including Intensive, Eco, Quick, Glass, Pre-Rinse
Capacity12 standard place settings
Energy ClassA (energy efficient)
Delay Start1-24 hours delay timer
Child LockSafety lock for control panel
Salt IndicatorLight indicates when to refill water softener salt
Rinse Aid IndicatorLight indicates when to refill rinse aid
Adjustable Upper BasketHeight adjustable for taller items
Half Load OptionEconomy wash for fewer dishes
Acoustic SignalBeeps when program finishes

Installation

Unpack and inspect contents. Ensure installation area is level and near water/drain connections.

  1. Position dishwasher: Place in desired location, ensuring 5cm clearance at sides and back.
  2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1MPa).
  3. Connect drain hose: Ensure proper drainage without kinks (height 40-100cm).
  4. Level the appliance: Adjust feet until dishwasher is stable and level.
  5. Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Installation must be performed by qualified personnel. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher for operation.

  1. Remove transport materials: Take out all packaging and securing tapes.
  2. Fill salt container: Add 1kg of special dishwasher salt (first use requires 1L water in container).
  3. Fill rinse aid dispenser: Open cap and fill to MAX line with rinse aid.
  4. Run initial wash: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Adjust softener setting according to local water hardness (1-5).

CAUTION! Use only dishwasher salt in salt container. Never use table salt.

Specifications

Controls and Settings

Control Panel: ON/OFF button, program selector, delay start, child lock, start/pause.

Program Selection: Turn knob to select desired program. LED indicators show active program.

Program Options: - Intensive (70°C): Heavily soiled dishes - Eco (50°C): Normally soiled dishes, energy saving - Quick (45°C): Lightly soiled dishes, 30 min - Glass (40°C): Delicate glassware - Pre-Rinse: Rinse without detergent - Half Load: For fewer dishes (lower basket only)

Additional Functions: Delay Start (1-24h), Child Lock (press 3 sec), Rinse Aid/Salt indicators.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

  1. Scrape off large food residues before loading.
  2. Lower basket: Plates, pots, pans (face center).
  3. Upper basket: Cups, glasses, small plates (angled downward).
  4. Cutlery basket: Knives, forks, spoons (handles down, mixed types).
  5. Adjust upper basket: Lift to higher position for tall items.
  6. Ensure spray arms rotate freely; don't block with large items.

Tip: Place heavily soiled items in lower basket, delicate items in upper basket.

Using Detergents and Additives

Use only dishwasher-specific products.

  1. Detergent: Fill main dispenser with powder, tablet, or gel detergent.
  2. Pre-wash detergent: For heavily soiled loads, add small amount to pre-wash chamber.
  3. Rinse aid: Fill dispenser to MAX line; adjust dosage (1-6) based on water spots.
  4. Salt: Fill salt container when indicator light comes on (approx. every 20 cycles).
  5. Special cleaners: Use monthly to remove limescale and odors.

WARNING! Never use regular soap or washing powder. Store detergents in cool, dry place.

Care & Maintenance

Regular maintenance ensures long appliance life.

  1. Clean filters weekly: Remove and rinse under running water.
  2. Clean spray arms monthly: Check for clogged holes.
  3. Wipe door seals: Clean with damp cloth to prevent leaks.
  4. Descale monthly: Use dishwasher cleaner or vinegar cycle.
  5. Clean exterior: Use mild detergent and soft cloth.

CAUTION! Unplug before maintenance. Never use abrasive cleaners or scouring pads.

Safety Information

Read all safety instructions before use.

Emergency: In case of leak, turn off water supply and unplug immediately.

Regulatory Information

CE certified. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste electrical products must not be disposed with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower/doorCheck plug, fuse, circuit breaker; ensure door closed properly.
Poor cleaning resultsLoading/detergentCheck loading; use correct detergent amount; clean filters.
Water not drainingDrain hose/filterCheck hose for kinks; clean filter; ensure proper drain height.
Leaking waterDoor seal/hoseCheck door seal for debris; tighten hose connections.
Noisy operationSpray arm/itemsCheck for items touching spray arm; ensure proper loading.
Salt light stays onSalt level/settingRefill salt container; check water hardness setting.
Error codes displayedVarious faultsNote error code (E1-E9) and consult service manual.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized BEKO service center. Do not attempt repairs yourself.

BEKO Dishwasher DIS 1520 N Manual © - All Rights Reserved 2025