beko dishwasher DIS15012 manual

The Beko DIS15012 is a freestanding dishwasher with a 12-place setting capacity, featuring multiple wash programs, energy efficiency class A, delay start function, child lock, and a stainless steel interior. It includes a cutlery basket, upper and lower racks, rinse aid and salt indicators, and an AquaIntense function for intensive cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, stainless steel tub, upper and lower racks, cutlery basket, filter system, salt and rinse aid compartments.

Feature	Description
Capacity	12 place settings
Energy Class	A (energy efficient)
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	1-24 hours delay timer
Child Lock	Prevents accidental program changes
AquaIntense Function	Extra spray for heavily soiled dishes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid is low
Half Load Option	Saves water and energy for smaller loads
Digital Display	Shows program status and remaining time

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the dishwasher: Adjust feet to ensure stability.

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

Add salt: Fill the water softener with special dishwasher salt (first use only).
Add rinse aid: Fill rinse aid dispenser to MAX line.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust setting in menu based on local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: DIS15012
Type: Freestanding dishwasher
Capacity: 12 place settings
Energy Rating: A
Water Consumption: Approx. 11 liters per cycle (Eco program)
Power Consumption: 0.95 kWh per cycle (Eco program)
Noise Level: 49 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz
Programs: Auto, Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Rinse

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, CHILD LOCK, START/PAUSE, HALF LOAD.

Display Icons: Program indicator, delay timer, salt/rinse aid alerts, child lock symbol.

Program Selection: Use rotary dial or buttons to select program. Delay Start: Press DELAY and use +/- to set hours. Child Lock: Press and hold CHILD LOCK for 3 seconds. Settings Menu: Access by holding PROGRAM + DELAY for 5 seconds to set water hardness, buzzer volume, etc.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Lower rack: Place plates, pots, pans facing center.
Upper rack: Place glasses, cups, bowls.
Cutlery basket: Place knives, forks, spoons with handles down.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Load according to manufacturer's loading diagrams for best results.

Wash Programs

Select program based on soil level and dish type.

Program	Temperature	Duration	Best For
Auto	45-65°C	1h 45min	Mixed daily loads
Intensive	70°C	2h 30min	Heavily soiled pots/pans
Eco	50°C	3h 15min	Energy-saving daily wash
Quick	40°C	30min	Lightly soiled, quick refresh
Glass	40°C	1h 10min	Delicate glassware
Rinse	Cold	15min	Rinse only (no detergent)

Note: Use recommended dishwasher detergent. Do not use regular soap.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove and rinse under water weekly.
Check spray arms: Ensure holes are not clogged.
Wipe door seals: Clean with damp cloth to prevent leaks.
Descale: Run empty cycle with vinegar or descaler monthly if in hard water area.
Exterior: Clean with mild detergent and soft cloth.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Prevents program changes during operation. Door Safety: Dishwasher stops if door opened mid-cycle. Overflow Protection: Auto shut-off if excess water detected. Thermal Cut-off: Prevents overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2017. Waste electrical products must not be disposed of with household waste. Please recycle. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug; ensure door closed properly; check circuit breaker.
Poor cleaning results	Loading/detergent	Reload dishes properly; use correct amount of fresh detergent; clean filter.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height correct.
Leaking water	Door seal/hose	Check door seal for debris; tighten hose connections.
Unusual noise	Spray arm/foreign object	Check for obstruction in spray arms; ensure dishes not touching spray arms.
Salt/Rinse Aid light on	Low levels	Refill salt and/or rinse aid compartment.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.