beko dishwasher DIS15020 manual

The Beko DIS15020 is a freestanding dishwasher with a 15-place setting capacity, featuring multiple wash programs, energy efficiency class A, delay start, child lock, salt and rinse aid indicators, and a stainless steel interior. It operates on a standard 120V AC, 60Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel, Spray arms, Filter system, Detergent dispenser, Salt container, Rinse aid dispenser, Upper and lower baskets, Cutlery basket.

FeatureDescription
Capacity15 standard place settings
Energy RatingClass A (Energy Efficient)
Wash ProgramsAuto, Intensive, Eco, Quick, Glass, Rinse
Delay StartProgrammable delay up to 24 hours
Child LockLocks control panel during operation
Salt IndicatorAlerts when water softener salt is low
Rinse Aid IndicatorAlerts when rinse aid is low
InteriorStainless steel tub and door
DisplayDigital display with remaining time
Half Load OptionEco wash for smaller loads

Installation

Unpack and inspect contents. Position near water supply, drain, and power outlet.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 145 psi).
  2. Connect drain hose: Ensure proper height (min 20 in, max 39 in from floor).
  3. Level the dishwasher: Adjust feet for stability.
  4. Plug into grounded power outlet.

WARNING! Ensure water and electrical connections are secure to prevent leaks or shock. Do not kink hoses.

First-Time Setup

Before first use, run a wash cycle without dishes.

  1. Remove shipping materials: Check interior for transit bolts or tape.
  2. Fill salt container: Use dishwasher salt only; run a rinse cycle to flush.
  3. Fill rinse aid dispenser: Adjust dosage via dial (1-6).
  4. Select language: Set display language via SETTINGS menu.
  5. Run initial cycle: Use Intensive program at highest temperature.

CAUTION! Use only dishwasher detergent. Do not use regular soap.

Specifications

Controls and Settings

Access programs and settings via control panel or remote (if applicable).

Control Panel: POWER, PROGRAM SELECTOR, DELAY START, CHILD LOCK, HALF LOAD, START/PAUSE.

Programs: Auto (senses soil), Intensive (heavy soil, 70°C), Eco (energy saving, 50°C), Quick (30 min, light soil), Glass (gentle, 40°C), Rinse (no detergent). Settings: Delay Start (1-24h), Child Lock (hold 3 sec), Rinse Aid dosage (1-6), Water Softener setting (based on hardness). Display: Shows selected program, remaining time, salt/rinse aid alerts.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Upper basket: For glasses, cups, saucers, small plates.
  2. Lower basket: For plates, pots, pans, large items.
  3. Cutlery basket: Place knives, forks, spoons; ensure no nesting.
  4. Detergent: Use only dishwasher detergent in dispenser (powder, tablet, or gel).
  5. Pre-rinse: Scrape off large food particles; no need to pre-wash.

Tip: Do not overload; ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

  1. Turn on: Press POWER.
  2. Load dishes and add detergent.
  3. Select program: Use PROGRAM SELECTOR.
  4. Optional: Set DELAY START if needed.
  5. Press START/PAUSE to begin cycle.
  6. Cycle ends: Display shows "End"; open door slightly to dry.

Program Guide: Auto (daily use), Intensive (pots/pans), Eco (energy saving), Quick (lightly soiled), Glass (crystal/glassware), Rinse (hold until full load).

WARNING! Do not open door during hot cycles; steam may cause burns.

Maintenance & Care

Regular maintenance ensures longevity.

  1. Clean filter: Remove and rinse under water weekly.
  2. Check spray arms: Ensure holes are not clogged.
  3. Refill salt: When indicator lights; use only dishwasher salt.
  4. Refill rinse aid: When indicator lights; adjust dosage as needed.
  5. Exterior cleaning: Wipe with damp cloth; no abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects on filter.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Copyright © Beko plc. All trademarks belong to Beko plc. For support, visit www.beko.com or contact customer service at 1-800-237-0536.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/child lockCheck plug; ensure child lock is off; close door properly.
Poor cleaning resultsLoading/detergentEnsure proper loading; use correct detergent amount; clean filter.
Water not drainingDrain hose cloggedCheck hose for kinks; clean filter; ensure drain height correct.
Leaking waterHose connectionsTighten inlet/drain hoses; ensure door seal is clean and intact.
Unusual noiseSpray arm obstructionCheck for dishes blocking spray arms; remove debris.
Salt indicator onSalt container emptyRefill with dishwasher salt; run a rinse cycle.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-237-0536; www.beko.com

beko dishwasher DIS15020 manual © - All Rights Reserved 2025