beko dishwasher DIS25010 manual

The Beko DIS25010 is a freestanding dishwasher with 10 place settings, A++ energy rating, 5 wash programs, digital display, delay start, half load option, child lock, and salt/low rinse aid indicators. It features stainless steel interior, adjustable upper basket, cutlery basket, and AquaIntense technology for better cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, stainless steel tub, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser.

Feature	Description
Energy Rating	A++ (energy efficient)
Place Settings	10 standard place settings
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Auto
Digital Display	Shows program time, delay start, and status indicators
Delay Start	Programmable delay up to 24 hours
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	Lights alert when refill needed
AquaIntense Technology	Enhanced spray arm system for better cleaning
Adjustable Upper Basket	Height adjustable for taller items

Installation

Unpack and inspect contents. Position near water supply, drain, and power outlet.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the dishwasher: Adjust feet to ensure machine is level and stable.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare dishwasher with salt and rinse aid.

Fill salt container: Remove lower basket, twist open salt cap, fill with 1 kg dishwasher salt, close tightly.
Fill rinse aid dispenser: Open flap on door, fill until MAX line, close flap.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match local water hardness (see manual).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: Beko DIS25010
Type: Freestanding dishwasher
Capacity: 10 place settings
Energy Rating: A++
Water Consumption: 9-11 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Programs: 5 wash programs + options

Controls and Settings

Control Panel: ON/OFF button, program selector, delay start, half load, child lock, start/pause.

Programs: Intensive (70°C), Eco (50°C), Quick (45 min), Glass (40°C), Auto (sensor-based).

Options: Delay Start (1-24 hrs), Half Load (for lower basket only), Child Lock (press 3 sec). Indicators: Salt, Rinse Aid, End. Settings: Water hardness (1-5), acoustic signal on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Plates, pots, pans (facing center).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Knives (handles up), spoons/forks mixed.
Adjust upper basket height for tall items by lifting sides.
Ensure spray arms rotate freely; do not block with large items.

Tip: Place delicate items in upper basket, heavily soiled items facing spray arms.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press ON/OFF, display lights up.
Select program: Turn program selector to desired program.
Add options: Press delay or half load if needed.
Start: Close door, press start/pause (program time shows).
During cycle: Door locks; child lock prevents changes.
After cycle: Wait for END light; open door slightly for drying.
Unload: Lower basket first to avoid dripping.

WARNING! Do not open door during hot cycles; steam may cause burns.

Maintenance & Care

Regular maintenance ensures longevity and performance.

Clean filter weekly: Remove lower basket, twist out filter assembly, rinse under tap.
Check spray arms: Remove and clear any debris from holes.
Refill salt: When salt indicator lights, add 1 kg dishwasher salt.
Refill rinse aid: When rinse aid indicator lights, fill to MAX line.
Clean door seals: Wipe with damp cloth to remove residue.
Run empty cycle monthly: Use Intensive program with dishwasher cleaner.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open dishwasher. Do not wash non-dishwasher-safe items. Use only detergents for dishwashers. Ensure door is closed during operation. Disconnect power before servicing.

Regulatory Information

CE compliant. Meets EU energy efficiency and safety standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power outlet; ensure door closed properly; child lock off.
Poor cleaning results	Loading/detergent	Check spray arms not blocked; use correct detergent amount; clean filter.
Water not draining	Drain hose/filter	Check drain hose for kinks; clean filter; ensure proper installation height.
Salt indicator on	Salt empty	Refill salt container; run short program to flush system.
Noise during cycle	Items touching spray arms	Rearrange load; ensure spray arms rotate freely.
Leaking water	Hose connections	Tighten inlet/drain hoses; check door seal for debris.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com