Beko Dishwasher DIS25011 Manual

The Beko DIS25011 is a freestanding dishwasher with 12 place settings, featuring 6 wash programs, A++ energy rating, 49 dB noise level, half load option, delay start, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Programs & Cycles 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet and drain hoses.

Feature	Description
Program Selection	6 wash programs including Intensive, Eco, Quick
Half Load Option	Reduces water and energy for smaller loads
Delay Start	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Filter System	3-stage filtration for optimal cleaning
Adjustable Upper Basket	Height adjustable for taller items
Cutlery Basket	Removable basket with separate compartments
Acoustic Insulation	Reduced noise level at 49 dB

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Position dishwasher: Place in desired location, ensure level using adjustable feet.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Remove transport materials: Take out shipping bolts and secure holes with caps.

WARNING! Dishwasher is heavy; use two people for handling. Ensure all connections are secure before first use.

First-Time Setup

Before first use, prepare dishwasher for operation.

Fill salt container: Remove lower basket, twist open salt cap, fill with special dishwasher salt (first use: add 1 liter water).
Fill rinse aid: Open dispenser on door, fill to MAX line, close securely.
Run initial cycle: Select Intensive program without dishes to clean interior.
Adjust water hardness: Set according to local water hardness using program button combination.
Load test dishes: Arrange according to loading guidelines for optimal cleaning.

CAUTION! Only use dishwasher-specific salt in salt container. Never use table salt.

Specifications

Model: DIS25011
Type: Freestanding
Place Settings: 12 standard place settings
Energy Rating: A++
Water Consumption: 9.5 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB
Programs: 6 wash programs
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 42 kg
Voltage: 220-240V, 50Hz
Max Inlet Water Pressure: 1 MPa
Max Inlet Water Temperature: 60°C

Controls and Settings

Control Panel: Program selector, Start/Pause, Half Load, Delay Start, Child Lock, Salt and Rinse Aid indicators.

Program Selection: Turn knob to select desired program. Available programs: Intensive (70°C), Eco (50°C), Normal (65°C), Quick (45°C), Glass (40°C), Rinse Only.

Special Functions: Half Load button (reduces consumption), Delay Start (1-24 hours), Child Lock (press and hold Start for 3 seconds).

Indicators: Salt indicator lights when salt is low. Rinse aid indicator lights when dispenser needs refilling. End indicator shows when cycle is complete.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying results.

Scrape off large food residues before loading.
Lower basket: Plates, pots, pans, lids. Face soiled surfaces toward center.
Upper basket: Glasses, cups, bowls, small plates. Angle items for proper drainage.
Cutlery basket: Forks and spoons handle down, knives handle up for safety.
Adjust upper basket: Lift to higher position for taller items in lower basket.
Ensure spray arms rotate freely without obstruction.

Tip: Do not overload. Water must reach all surfaces for effective cleaning.

Using Detergents & Additives

Use only dishwasher-specific products for best results.

Detergent: Fill main detergent dispenser according to water hardness and soil level (15-25g). Use tablets or powder.
Prewash detergent: For heavily soiled loads, add small amount to prewash compartment.
Rinse aid: Essential for spot-free drying. Adjust dispenser setting (1-6) based on water hardness.
Salt: Regenerates water softener. Refill when indicator lights (approximately every 20 cycles).

WARNING! Never use regular dish soap. It creates excessive suds that can damage the machine.

Programs & Cycles

Program	Temperature	Duration	Best For
Intensive	70°C	155 min	Heavily soiled pots, pans, baking dishes
Eco	50°C	195 min	Normally soiled dishes, energy saving
Normal	65°C	125 min	Daily use, mixed loads
Quick	45°C	35 min	Lightly soiled, quick refresh
Glass	40°C	85 min	Glassware, delicate items
Rinse Only	Cold	15 min	Rinsing without detergent

Half Load Option: Reduces water and energy by approximately 30% when loading only one basket.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean filter weekly: Remove lower basket, twist filter assembly counterclockwise, rinse under warm water.
Clean spray arms monthly: Remove by pulling upward, check for clogs in spray holes.
Wipe door seals: Clean with damp cloth to prevent mold and ensure proper sealing.
Clean interior: Run empty cycle with dishwasher cleaner every 2-3 months.
Exterior: Wipe with soft damp cloth, mild detergent if needed.

CAUTION! Unplug before any maintenance. Never use abrasive cleaners or scouring pads.

Regulatory Information

CE marked: Complies with European Directives. Energy label according to EU regulation 1059/2010. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For support, visit www.beko.com or contact local Beko service center. Serial number located on rating plate inside door.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Door not closed properly, no power	Ensure door is latched, check power outlet, circuit breaker
Poor cleaning results	Overloaded, wrong program, clogged filter	Reduce load, select appropriate program, clean filter
Water not draining	Drain hose kinked, filter clogged	Check hose path, clean filter system
White residue on dishes	Insufficient rinse aid, water too hard	Refill rinse aid, adjust dispenser setting, check salt level
Leaking water	Overfilling, damaged door seal	Check water inlet valve, inspect and clean door seal
Unusual noise	Spray arm hitting dishes, foreign object	Rearrange load, check for small objects in pump area
Salt indicator stays on	Salt container empty, water hardness setting incorrect	Refill salt, check and adjust water hardness setting

Reset: Unplug for 5 minutes to reset electronic control.

Service: For persistent issues, contact authorized Beko service: www.beko.com/support