beko dishwasher DIS26120 manual

The Beko DIS26120 is a freestanding dishwasher with a 12-place setting capacity, featuring an A++ energy rating, 5 wash programs, digital display, delay start, child lock, half load option, and salt and rinse aid indicators. It operates on 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

FeatureDescription
Capacity12 place settings
Energy RatingA++
Wash Programs5 programs including Intensive, Eco, Quick, Glass, and Rinse
Digital DisplayShows program duration, delay time, and error codes
Delay StartProgrammable up to 24 hours
Child LockPrevents accidental program changes
Half Load OptionReduces water and energy consumption for smaller loads
Salt IndicatorAlerts when water softener salt is low
Rinse Aid IndicatorAlerts when rinse aid needs refilling
Acoustic SignalSounds when program ends

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap using supplied connector.
  2. Connect drain hose: Place hose into sink or connect to waste pipe (max height 1m).
  3. Level the dishwasher: Adjust feet to ensure machine is stable and level.
  4. Plug into grounded power outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, unscrew salt cap, fill with special dishwasher salt, then tighten.
  2. Fill rinse aid dispenser: Open dispenser lid on door, fill to MAX line, close lid.
  3. Run initial empty cycle: Select Intensive program without dishes to clean interior.
  4. Set water hardness: Consult manual to adjust softener setting based on local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Start button, Half Load button, Child Lock button, Start/Pause button.

Display Icons: Program duration, Delay time, Salt indicator, Rinse aid indicator, Child lock symbol.

Program Selection: Press program button repeatedly to cycle through options. Delay Start: Press Delay button, then use +/- to set hours. Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate. Half Load: Press to enable for smaller loads (uses less water and energy).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: For pots, pans, plates, and larger items.
  3. Upper basket: For glasses, cups, saucers, and smaller dishes.
  4. Cutlery basket: Place cutlery with handles down (except sharp knives).
  5. Ensure items do not block spray arms or detergent dispenser.

Tip: Place heavily soiled items facing the center. Do not overload.

Using Wash Programs

Select program based on soil level and dish type.

  1. Add detergent: Fill main wash compartment for pre-wash and main wash (use tablets or powder).
  2. Close detergent dispenser and door firmly.
  3. Select program: Press ON/OFF, then choose program (Intensive for pots/pans, Eco for daily, Quick for lightly soiled, Glass for delicate, Rinse for no detergent).
  4. Optional: Set Delay Start or Half Load.
  5. Press Start/Pause to begin cycle.
  6. Program ends with acoustic signal; open door slightly to let steam escape.

WARNING! Use only dishwasher detergent. Do not use regular soap.

Care & Maintenance

Regular maintenance ensures longevity.

  1. Clean filter: Remove lower basket, twist and lift out filter assembly, rinse under tap weekly.
  2. Check spray arms: Ensure holes are not clogged; rotate freely.
  3. Refill salt: When salt indicator lights, add salt to container (only when dishwasher is off).
  4. Refill rinse aid: When rinse aid indicator lights, fill dispenser to MAX line.
  5. Wipe door seals and interior with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not remove spray arms unless necessary.

Safety Information

Read all instructions before use. Keep children away from open door (hot surfaces). Do not open door during wash cycle (hot steam). Only connect to grounded outlet. Do not wash items soiled with flammable substances. Unplug before cleaning or servicing.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste disposal: Dispose according to local regulations; contact municipal waste facility. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorCheck plug and power; ensure door is closed properly.
Poor cleaning resultsLoading/detergentCheck loading; ensure detergent is fresh and dispenser opens; clean filter.
Water not drainingDrain hose/filterCheck hose for kinks; clean filter; ensure drain height is correct.
Error code on displayVarious faultsConsult manual for code meaning; try resetting by turning off/on.
Leaking waterHoses/door sealCheck hose connections; inspect door seal for damage; ensure dishwasher is level.

Reset: Turn off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service center; do not attempt repairs yourself.

beko dishwasher DIS26120 manual © - All Rights Reserved 2025