beko dishwasher DIS28120 manual

The Beko DIS28120 is a freestanding dishwasher with 14 place settings, A++ energy rating, and multiple wash programs. It features electronic controls, delay start, child lock, half load option, and adjustable upper basket. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, upper and lower baskets, cutlery basket, filter system, salt and rinse aid dispensers.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Wash Programs	8 programs including Intensive, Eco, Quick, Glass
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Half Load	Option for smaller loads to save water/energy
Adjustable Upper Basket	Height adjustable for taller items
Digital Display	Shows remaining time and program status
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the dishwasher: Adjust feet to ensure machine is stable and level.
Plug into grounded power outlet.

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

Fill salt dispenser: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open dispenser lid on door, fill to MAX line with rinse aid.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness (see manual).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: DIS28120
Type: Freestanding
Capacity: 14 place settings
Energy Consumption: 0.92 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V ~ 50Hz
Power: 2100 W
Programs: 8 (Intensive, Eco, Quick 45', Glass, Soak, 90', Auto, Half Load)

Controls and Settings

Access programs via control panel on top of door.

Buttons: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (70°C, for heavily soiled), Eco (50°C, energy saving), Quick 45' (45°C, lightly soiled), Glass (40°C, delicate), Soak (pre-wash), 90' (everyday), Auto (sensor-based), Half Load (for smaller loads). Settings: Water hardness (1-5), rinse aid dosage (1-4), acoustic signals on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans. Adjustable rack for larger items.
Upper basket: For glasses, cups, small bowls. Height adjustable.
Cutlery basket: Place knives pointing down, spoons and forks mixed.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Place heavily soiled items facing center. Do not overload.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Load dishes and add detergent to dispenser.
Select program: Press PROGRAM button until desired program lights up.
Optional: Set DELAY START (1-24 hrs) or HALF LOAD.
Start: Press START/PAUSE. Door locks automatically.
After cycle: Wait for END indicator; open door slightly to let steam escape before unloading.

WARNING! Use only dishwasher detergent. Do not open door during hot wash phases.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove lower basket, twist filter assembly counterclockwise, rinse under water weekly.
Clean spray arms: Check for blockages monthly; remove by lifting upward and rinsing.
Check salt level: Refill when salt indicator lights (approx. every 20 cycles).
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects to clean spray arms.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open dishwasher (hot surfaces).
Do not sit or stand on open door.
Disconnect power before servicing.

WARNING! Risk of electric shock if used improperly. Do not modify plug.

Regulatory Information

CE marked. Complies with EU directives for low voltage, EMC, and eco-design. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power connection; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Check spray arms are not blocked; use correct amount of fresh detergent.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks or blockages.
Leaking water	Hoses/door seal	Check inlet and drain hose connections; inspect door seal for damage.
Unusual noise	Spray arm/items	Ensure spray arms rotate freely; check dishes are not touching spray arms.

Reset: Turn off power for 2 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.