beko dishwasher DIS35023 manual

The Beko DIS35023 is a freestanding dishwasher with a capacity for 13 place settings, featuring 6 wash programs, A++ energy rating, digital display, delay timer, half load option, child lock, and salt/low rinse aid indicators. It operates on 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, control panel with digital display, water inlet and drain hoses.

FeatureDescription
Capacity13 place settings
Energy RatingA++
Wash Programs6 programs including Intensive, Eco, Quick, Glass, etc.
Digital DisplayShows program duration, delay time, and error codes
Delay TimerProgram start delay up to 24 hours
Half Load OptionReduces water and energy for smaller loads
Child LockPrevents accidental program changes
Salt IndicatorAlerts when water softener salt is low
Rinse Aid IndicatorAlerts when rinse aid needs refilling
Acoustic SignalBeeps when program ends

Installation

Unpack and inspect contents. Ensure location is near water inlet, drain, and power outlet.

  1. Connect water inlet: Attach inlet hose to water tap (max pressure 1 MPa).
  2. Connect drain hose: Place hose into sink or drain pipe (min height 40 cm).
  3. Level the dishwasher: Adjust feet to ensure machine is level.
  4. Plug into power outlet: Use grounded socket (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or electric shock. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, unscrew salt cap, fill with 1 kg of special dishwasher salt, tighten cap.
  2. Fill rinse aid dispenser: Open dispenser lid, fill to MAX line, close lid.
  3. Run empty wash: Select Intensive program without dishes to clean interior.
  4. Set water hardness: Use program button combination to set according to local water hardness (1-5).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Timer button, Half Load button, Start/Pause button, Child Lock button.

Display Icons: Program indicator, Delay time, Salt low, Rinse aid low, Child lock active.

Program Selection: Press program button repeatedly to cycle through options. Delay Timer: Press to set delay (1-24 hours). Half Load: Reduces water/energy for fewer dishes. Child Lock: Press and hold for 3 seconds to activate/deactivate. Start/Pause: Starts selected program or pauses running cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Lower basket: For plates, pots, pans. Adjustable rack height.
  2. Upper basket: For glasses, cups, small bowls. Adjustable tilt.
  3. Cutlery basket: Place knives, forks, spoons with handles down.
  4. Detergent dispenser: Add powder or tablet to main wash compartment; liquid detergent to pre-wash if needed.

Tip: Do not overload. Ensure spray arms can rotate freely. Place delicate items in upper basket.

Using Wash Programs

Select program based on soil level and dish type.

  1. Intensive: For heavily soiled pots and pans (70°C, 180 min).
  2. Eco: For normally soiled dishes, energy efficient (50°C, 195 min).
  3. Quick 30': For lightly soiled dishes, quick wash (55°C, 30 min).
  4. Glass: For delicate glassware (40°C, 90 min).
  5. 90': For daily wash (65°C, 90 min).
  6. Soak: Pre-rinse cycle for dishes to be washed later.

WARNING! Do not open door during hot wash cycles. Steam may cause burns.

Maintenance & Cleaning

Regular maintenance ensures longevity.

  1. Clean filters: Remove lower basket, twist out filter assembly, rinse under tap weekly.
  2. Clean spray arms: Check for blockages, rinse holes.
  3. Wipe door seals: Use damp cloth to remove food debris.
  4. Descale: Run empty cycle with dishwasher descaler every 2 months if in hard water area.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Safety Features

Child Lock: Locks control panel. Overflow Protection: Automatically stops water if leak detected. Door Safety: Door must be closed to start cycle; stops if opened during operation.

Regulatory Information

CE marked. Complies with EU directives for low voltage and electromagnetic compatibility. Energy label according to EU regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/child lockCheck power plug; ensure child lock is off; close door properly.
Poor cleaning resultsLoading/detergentCheck spray arms rotate freely; use correct detergent amount; clean filters.
Water not drainingDrain hose blockageCheck drain hose for kinks; clean filter; ensure drain height min 40 cm.
Salt indicator flashingSalt lowRefill salt container; run short program to flush system.
Error code E1Water inlet problemCheck water tap is on; inlet hose not kinked; filter clean.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model number (DIS35023) ready.

beko dishwasher DIS35023 manual © - All Rights Reserved 2025