beko dishwasher DIS48020 manual

The Beko DIS48020 is a freestanding dishwasher with a 12-place setting capacity, featuring an A++ energy rating, 6 wash programs, a half-load function, and a digital display. It includes a delay timer, child lock, and an AquaIntense function for intensive cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filter system, and inlet/drain hoses.

Feature	Description
Capacity	12 place settings
Energy Rating	A++
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, 90 Minute, and Rinse
Half Load Function	Reduces water and energy for smaller loads
Digital Display	Shows program status, time remaining, and error codes
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
AquaIntense Function	Extra spray for heavily soiled dishes
Water Softener	Adjustable salt container for hard water areas
Noise Level	49 dB (Quiet operation)

Installation

Unpack and inspect contents. Position near water supply, drain, and power outlet.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the dishwasher: Adjust feet for stability.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water and electrical connections are secure. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, then refill with water.
Fill rinse aid dispenser: Open lid, fill to MAX line, close.
Run empty wash: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match local hardness level.

CAUTION! Use only dishwasher salt and rinse aid. Do not mix with detergent.

Specifications

Model: DIS48020
Type: Freestanding
Capacity: 12 place settings
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Programs: 6 wash programs
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Net Weight: 42 kg
Noise Level: 49 dB

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, AQUAINTENSE, START/PAUSE.

Programs: Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), 90 Minute (65°C), Rinse (cold).

Settings: Adjust salt consumption (via button combination), rinse aid dosage (1-6 levels), water hardness (1-5). Display shows program duration, remaining time, and error codes (e.g., E1, E2).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues.
Load lower basket: Pots, pans, plates (facing center).
Load upper basket: Glasses, cups, small plates.
Cutlery basket: Place handles down; separate silverware.
Add detergent: Use powder, tablets, or gel in dispenser.

Tip: Do not overload; ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Select program: Press PROGRAM repeatedly until desired program lights.
Add options: Press HALF LOAD for fewer dishes; DELAY START for timed wash.
Start: Press START/PAUSE. Display shows countdown.
After cycle: Wait for END indicator; open door slightly to dry dishes.

WARNING! Do not open door during wash; hot steam may escape.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove lower basket, twist out filter, rinse under tap weekly.
Clean spray arms: Check for blockages monthly.
Descale: Run empty with vinegar or descaler every 3 months.
Exterior: Wipe with damp cloth; no abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects on spray arms.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open door (risk of hot water).
Use only dishwasher-safe detergents.

WARNING! Risk of electric shock. Do not immerse in water.

Regulatory Information

CE compliant. Meets EU energy labeling requirements. Waste disposal: Follow local regulations. For support, visit www.beko.com or contact +44 (0) 333 207 9710.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door	Check plug; ensure door closed properly.
Poor cleaning results	Loading, filter, detergent	Reload dishes; clean filter; use correct detergent amount.
Water not draining	Drain hose, filter	Check hose for kinks; clean filter.
Error code E1	Water inlet	Check water tap; clean inlet filter.
Error code E2	Drain issue	Ensure drain hose is not blocked.
Noise during operation	Spray arm, dishes	Check for obstruction; reposition dishes.

Reset: Unplug for 5 minutes, then restart.

Service: +44 (0) 333 207 9710; www.beko.com