Beko Dishwasher DIT28330 Manual

The Beko DIT28330 is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 12 washing programs including Eco, Intensive, and Quick Wash, delay start timer, child lock, half-load option, and AquaIntense technology for improved cleaning. It includes a salt and rinse aid indicator, adjustable upper basket, and cutlery basket. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, adjustable upper basket, lower basket, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, and filter system.

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

1. Connect water supply: Attach inlet hose to water tap (ensure filter is clean).
2. Connect drain hose: Place hose into sink or dedicated drain pipe (max height 1m).
3. Level the appliance: Adjust feet to ensure dishwasher is stable and level.
4. Plug into grounded power outlet.

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

1. Fill salt container: Remove lower basket, unscrew salt cap, fill with dishwasher salt (first time add 1L water).
2. Fill rinse aid dispenser: Open dispenser lid, fill to MAX line, close securely.
3. Add detergent: Use powder or tablet in detergent dispenser.
4. Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher-specific salt and rinse aid. Do not mix with detergent.

Specifications

• Type: Freestanding dishwasher.
• Capacity: 14 place settings.
• Energy Class: A++.
• Water Consumption: Approx. 10L per cycle (Eco program).
• Power Consumption: Approx. 0.95 kWh per cycle (Eco program).
• Noise Level: 49 dB(A).
• Programs: 12 including Auto, Eco, Intensive, Quick 30', Glass, Delicate.
• Dimensions (HxWxD): 85cm x 60cm x 60cm.
• Power Supply: 220-240V, 50Hz.
• Inlet Water Pressure: 0.5-10 bar.

Controls and Settings

Control Panel: POWER button, Program selector knob, Delay Start button, Half Load button, Child Lock button, Start/Pause button.

Display Icons: Salt indicator, Rinse aid indicator, Program time remaining, Delay start active, Child lock active.

Program Selection: Turn knob to desired program (Eco, Intensive, Quick 30', etc.). Delay Start: Press button, use +/- to set hours (1-24). Half Load: Press to activate for fewer dishes. Child Lock: Press and hold for 3 seconds to lock/unlock controls. Start/Pause: Start program or pause during operation.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

1. Scrape off large food residues (no need to pre-rinse).
2. Lower basket: For plates, pots, pans. Adjustable tines for different sizes.
3. Upper basket: For glasses, cups, small bowls. Height adjustable.
4. Cutlery basket: Place knives, forks, spoons with handles down (sharp items pointing down).
5. Ensure spray arms can rotate freely; do not block with large items.

Tip: Place heavily soiled items facing the center spray arm for better cleaning.

Using Programs & Functions

Select program based on soil level and dish type.

1. Eco: Energy-efficient for normally soiled dishes (approx. 3 hours).
2. Intensive: For heavily soiled pots and pans (75°C).
3. Quick 30': Fast wash for lightly soiled dishes (30 minutes).
4. Auto: Automatically adjusts time/temp based on soil sensors.
5. Glass: Gentle wash for delicate glassware (45°C).
6. Delicate: For china and fine ceramics.
7. Half Load: Use with half load button for fewer dishes (saves water/energy).
8. Delay Start: Set to start later (e.g., during off-peak hours).

WARNING! Do not open door during hot wash cycles; steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity and performance.

1. Clean filter: Remove lower basket, twist and lift out filter assembly, rinse under water weekly.
2. Check spray arms: Ensure holes are not clogged; rotate freely.
3. Refill salt: When salt indicator lights, add dishwasher salt to container.
4. Refill rinse aid: When rinse aid indicator lights, fill dispenser.
5. Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.
6. Monthly cleaning: Run empty cycle with dishwasher cleaner or vinegar to remove limescale.

CAUTION! Unplug before cleaning interior components. Do not use sharp objects to clean spray arms.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2017. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com