beko dishwasher DSFN 1534 manual

The Beko DSFN 1534 is a freestanding dishwasher with a 13-place setting capacity, featuring an A++ energy rating, 5 wash programs, a digital display, delay start function, and AquaStop leak protection. It includes a half-load option, adjustable upper basket, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt and rinse aid dispensers, inlet and drain hoses.

Feature	Description
Capacity	13 place settings
Energy Rating	A++
Wash Programs	5 programs (Auto, Intensive, Eco, Quick, Rinse)
Digital Display	Shows program duration, delay time, and error codes
Delay Start	Programmable up to 24 hours
Half Load Option	Reduces water and energy for smaller loads
Adjustable Upper Basket	Height adjustable for taller items
AquaStop	Leak protection system
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Child Lock	Safety lock for control panel

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or standpipe (min height 40 cm, max 100 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power outlet.

WARNING! Do not use an extension cord. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging from interior and racks.
Fill salt dispenser: Unscrew cap, add 1 liter of water, then fill with dishwasher salt.
Fill rinse aid dispenser: Open compartment, fill to MAX line with rinse aid.
Run a wash cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: Beko DSFN 1534
Type: Freestanding Dishwasher
Capacity: 13 place settings
Energy Consumption: 0.83 kWh per cycle (Eco program)
Water Consumption: 10 liters per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V ~ 50Hz
Power: 2000 W
Programs: Auto, Intensive (70°C), Eco (50°C), Quick (45°C), Rinse

Controls and Settings

Control Panel: ON/OFF button, Program selector, Delay Start button, Half Load button, Start/Pause button.

Display Symbols: Program duration, Delay time, Salt refill, Rinse aid refill, Child lock.

Program Selection: Turn knob to desired program. Delay Start: Press button, use +/- to set hours. Half Load: Press to activate for smaller loads. Child Lock: Press and hold Start/Pause for 3 seconds.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans. Adjustable rack for cutlery.
Upper basket: For glasses, cups, saucers. Height adjustable.
Cutlery basket: Place knives, forks, spoons with handles down.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Place heavily soiled items facing the center spray arm.

Using Wash Programs

Select program based on soil level and dish type.

Auto: Automatically adjusts time and temperature based on soil sensors.
Intensive: For heavily soiled pots and pans (70°C, 150 min).
Eco: Energy-saving for normally soiled dishes (50°C, 180 min).
Quick: For lightly soiled loads (45°C, 30 min).
Rinse: Rinse only, no detergent (15 min).

Add detergent to dispenser, close door, select program, press Start.

WARNING! Use only dishwasher detergent. Do not use hand soap or laundry detergent.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove and rinse under water weekly.
Clean spray arms: Check for blockages monthly.
Descale: Run empty cycle with dishwasher cleaner every 2 months.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not touch heating element.

Regulatory Information

CE compliant. Meets EU energy labeling requirements. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power outlet; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Check filter; ensure proper loading; use correct detergent amount.
Water not draining	Drain hose/filter	Check drain hose for kinks; clean filter.
Error code E1	Water inlet	Check water supply; ensure tap is open.
Error code E3	Heating	Check heating element; may require service.
Leaking	Hoses/door seal	Check hose connections; inspect door seal for damage.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model number ready.