beko dishwasher DSFN 6831 X manual

The Beko DSFN 6831 X is a freestanding dishwasher with a capacity for up to 13 place settings, featuring multiple wash programs, energy efficiency, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Spray Arms, Filters, Salt Container, Rinse Aid Dispenser, Cutlery Basket, Upper and Lower Baskets.

Feature	Description
Capacity	Up to 13 place settings
Energy Class	A+++ for energy efficiency
Wash Programs	Eco, Intensive, Auto, Quick, Glass, etc.
Delay Start	Timer function up to 24 hours
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid is low
Acoustic Signal	Beeps when program ends
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is near water supply, drain, and power outlet.

Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or connect to waste pipe (min height 40 cm).
Level the dishwasher: Adjust feet to ensure stability.
Plug into power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or electrical hazards. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport safety materials: Check interior for any packing strips.
Fill salt container: Unscrew cap, add water softener salt (first use only), then fill with salt.
Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX mark.
Run empty wash: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding Dishwasher.
Capacity: 13 place settings.
Energy Consumption: 0.83 kWh per cycle (Eco program).
Water Consumption: 9.5 liters per cycle (Eco program).
Noise Level: 49 dB(A).
Programs: Eco, Intensive (70°C), Auto, Quick (30 min), Glass, Hygiene.
Options: Half Load, Delay Start (1-24h), Extra Dry.
Power Supply: 220-240V, 50Hz.
Weight: Approx. 42 kg.

Controls and Settings

Access controls via front panel buttons and display.

Buttons: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, EXTRA DRY, START/PAUSE, CHILD LOCK.

Display Indicators: Program duration, Delay time, Salt/Rinse Aid refill, Child Lock active, End of cycle.

Settings: Program selection (rotate knob or press buttons), Delay Start (press repeatedly to set hours), Half Load (press to activate for lower basket only), Extra Dry (activates additional drying phase). Child Lock: Press and hold for 3 seconds to activate/deactivate.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower Basket: Plates, pots, pans. Place facing center, avoid blocking spray arm.
Upper Basket: Glasses, cups, small bowls. Use foldable spikes for plates.
Cutlery Basket: Forks, knives, spoons. Mix items for better cleaning.
Check spray arms rotate freely after loading.

Tip: Do not overload; ensure water can reach all surfaces.

Using Wash Programs

Select program based on soil level and dish type.

Eco: For normally soiled dishes, energy-efficient (approx. 3 hours).
Intensive: For heavily soiled pots/pans, 70°C.
Auto: Automatically adjusts time/temperature based on soil sensors.
Quick: 30-minute wash for lightly soiled loads.
Glass: Gentle wash for delicate glassware.
Hygiene: High temperature for baby bottles/sanitizing.
Add detergent to dispenser, close door, select program and options, press START.
After cycle ends, wait a few minutes before unloading to avoid steam burns.

WARNING! Use only dishwasher detergent. Do not use regular soap.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters weekly: Remove lower basket, twist and lift out filter assembly, rinse under tap.
Check spray arms monthly for clogs; clean holes with toothpick.
Wipe door seals and interior with damp cloth.
Refill salt when indicator lights (approx. every 2 months).
Refill rinse aid when indicator lights (adjust dosage via dial inside dispenser).

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE Mark: Complies with European directives. WEEE: Do not dispose with household waste; recycle appropriately. For EU product database, visit eprel.ec.europa.eu. Copyright © Beko plc. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug, fuse, power supply; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Reload dishes properly; use correct amount of fresh detergent; clean filters.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height is correct.
Leaking water	Hoses/door seal	Tighten hose connections; check door seal for debris/damage.
Unusual noise	Spray arm/foreign object	Ensure spray arms rotate freely; remove foreign objects from pump area.

Reset: Turn off power for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com.