beko dishwasher DSFS 6830 manual

The Beko DSFS 6830 is a freestanding dishwasher featuring 14 place settings, an A++ energy rating, and a range of wash programs including Eco, Intensive, and Quick Wash. It includes features such as a delay timer, child lock, half-load option, and a digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital display, control panel, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, filter system, and water inlet/outlet connections.

FeatureDescription
Energy RatingA++ for energy efficiency
Place Settings14 standard place settings capacity
Wash ProgramsEco, Intensive, Quick, Glass, Auto
Delay TimerProgram start delay up to 24 hours
Child LockSafety lock for control panel
Half LoadOption for washing fewer dishes
Digital DisplayShows program status and time remaining
Filter SystemSelf-cleaning filter for easy maintenance
Water SoftenerAdjustable for different water hardness levels
DryingCondensation drying system

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap using supplied connector.
  2. Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
  3. Level the dishwasher: Adjust feet until unit is stable and level.
  4. Plug into grounded power outlet.

WARNING! Ensure water connections are tight to prevent leaks. Only use cold water supply.

First-Time Setup

Before first use, run an empty wash cycle.

  1. Remove shipping materials: Check interior for any transit blocks or tapes.
  2. Fill rinse aid: Open dispenser and fill until indicator shows "Full".
  3. Add salt: Fill water softener with special dishwasher salt (if water hardness > 4°dH).
  4. Run initial cycle: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Use settings menu to match local water hardness.

CAUTION! Only use detergents and rinse aids specifically designed for dishwashers.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Indicators: Program time remaining, end time (with delay), salt warning, rinse aid warning.

Program Selection: Eco (energy saving), Intensive (heavily soiled), Quick (lightly soiled), Glass (fragile items), Auto (sensor-based), Rinse (rinse only). Settings: Water hardness (1-5), rinse aid dosage (1-5), acoustic signal on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

  1. Lower basket: Plates, pots, pans (face inward toward spray arm).
  2. Upper basket: Cups, glasses, small bowls (angled downward).
  3. Cutlery basket: Knives, forks, spoons (handles down, mixed types).
  4. Pre-rinse: Remove large food particles; no need to pre-wash.
  5. Do not overload: Ensure water can reach all surfaces.

Tip: Place delicate items in upper basket, heavily soiled items facing center.

Using Wash Programs

Select program based on soil level and dish type.

  1. Add detergent: Fill main wash compartment; use pre-wash for heavily soiled loads.
  2. Select program: Turn dial or press button for desired program.
  3. Optional settings: Press DELAY for delayed start; HALF LOAD for smaller loads.
  4. Start: Close door firmly; press START/PAUSE.
  5. During cycle: Door locks automatically; display shows time remaining.
  6. After cycle: Wait for beep; open door slightly to allow steam escape and better drying.

WARNING! Do not open door during wash cycle; hot water/steam may cause burns.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Clean filter: Remove and rinse under warm water weekly.
  2. Check spray arms: Ensure holes are not clogged; rotate freely.
  3. Refill rinse aid: When indicator light comes on or every 20-30 cycles.
  4. Refill salt: When salt warning light appears (if water softener installed).
  5. Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.
  6. Monthly cleaning: Run empty cycle with dishwasher cleaner to remove grease/limescale.

CAUTION! Unplug before any maintenance. Never use sharp objects to clean spray arms.

Safety Information

Read all safety instructions before installation and use.

WARNING! Risk of electric shock if installed improperly. Contact qualified technician for installation.

Regulatory Information

CE Marking: Complies with European Directives for safety and electromagnetic compatibility. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle according to local regulations. Energy Label: Rated A++ according to EU Regulation 1059/2010. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower/doorCheck power connection; ensure door is closed properly; check child lock.
Poor cleaning resultsLoading/detergentImprove loading; use correct amount of fresh detergent; clean filter.
Water not drainingDrain hose/filterCheck drain hose for kinks; clean filter; ensure proper installation height.
Leaking waterDoor seal/hosesCheck door seal for debris; ensure hoses are properly connected and undamaged.
Unusual noiseSpray arm/itemsCheck for items touching spray arm; ensure spray arm rotates freely.
Error codes on displayVarious faultsConsult manual for specific error code meaning; reset by turning power off/on.

Reset: Turn off at mains for 2 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com

beko dishwasher DSFS 6830 manual © - All Rights Reserved 2025