beko dishwasher DSN 04310 X manual

The Beko DSN 04310 X is a freestanding dishwasher with a 10-place setting capacity, featuring an A++ energy rating, 46 dB noise level, and multiple wash programs including Eco, Intensive, and Quick cycles. It includes a delay start timer, child lock, salt and rinse aid indicators, and a half-load option. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, and filter system.

Feature	Description
Energy Rating	A++ for high energy efficiency
Capacity	10 standard place settings
Noise Level	46 dB (quiet operation)
Wash Programs	Eco, Intensive, Quick, Glass, Auto
Delay Start	Timer for delayed cycle start (1-24 hours)
Child Lock	Safety lock for control panel
Half Load	Option for washing fewer dishes
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Digital Display	Shows program time and status
AquaStop	Leak protection system

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water supply: Attach inlet hose to water tap (ensure seal is tight).
Connect drain hose: Place hose into sink or dedicated drain pipe (max height 1m).
Level the dishwasher: Adjust feet to ensure machine is stable and level.
Plug into grounded power outlet.

WARNING! Do not use extension cords. Ensure water connections are secure to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew salt cap, fill with special dishwasher salt (first use may require water).
Fill rinse aid dispenser: Open dispenser lid on door, fill to MAX line with rinse aid.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Load detergent: Use powder or tablet in detergent dispenser as per program.

CAUTION! Only use dishwasher-specific salt and rinse aid. Do not mix detergent types.

Specifications

Model: DSN 04310 X
Type: Freestanding dishwasher
Capacity: 10 place settings
Energy Class: A++
Water Consumption: Approx. 9.5 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 46 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz
Programs: Eco, Intensive, Quick (30 min), Glass, Auto, Rinse

Controls and Settings

Access programs via control panel buttons and digital display.

Buttons: POWER ON/OFF, PROGRAM SELECTION (Eco, Intensive, Quick, etc.), DELAY START (1-24h), HALF LOAD, CHILD LOCK, START/PAUSE.

Display: Shows selected program, remaining time, delay hours, and indicator icons (salt, rinse aid).

Settings: Default program is Auto. Use delay start to run during off-peak hours. Activate child lock by holding LOCK button for 3 seconds.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Plates, pots, pans (face inward).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Place knives (handles up), spoons and forks mixed.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Refer to loading diagram on inner door for guidance.

Using Wash Programs

Select program based on soil level and dish type.

Eco: Energy-saving for normally soiled dishes (approx. 3 hours).
Intensive: For heavily soiled pots and pans (75°C).
Quick 30': Light soil, no drying (30 minutes).
Glass: Gentle wash for delicate glassware (45°C).
Auto: Sensors adjust time/temperature based on soil.
Rinse: Rinse only, no detergent (prevents odors).

To start: Close door, select program, press START. To pause: Press START/PAUSE; door locks during cycle.

WARNING! Do not open door during hot cycles; steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Twist and lift out filter assembly; rinse under tap weekly.
Check spray arms: Ensure holes are not clogged; rotate manually.
Wipe door seals: Use damp cloth to remove debris.
Descale: Run empty cycle with dishwasher cleaner every 2 months if in hard water area.
Refill salt and rinse aid when indicators light.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug and power; ensure door is closed properly.
Poor cleaning results	Loading/filter/detergent	Rearrange dishes; clean filter; use correct detergent amount.
Water not draining	Drain hose clogged	Check hose for kinks; clean filter; ensure drain height is correct.
Salt indicator remains on	Salt container empty	Refill with dishwasher salt; run short program to flush.
Unusual noise	Spray arm obstruction	Check for utensils blocking spray arms; ensure baskets are properly inserted.
Leaking water	Hose connections/inlet valve	Tighten connections; check door seal for debris; contact service if valve faulty.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Visit www.beko.com for contact details.