Beko Dishwasher DSN 1430 X Manual

The Beko DSN 1430 X is a freestanding dishwasher with a 13-place setting capacity, featuring 6 wash programs, an A++ energy rating, and a 49 dB noise level. It includes a delay start function, child lock, salt and rinse aid indicators, and an AquaIntense function for intensive cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Upper and Lower Baskets, Cutlery Basket, Filter System, Salt Container, Rinse Aid Dispenser, Inlet and Drain Hoses.

Feature	Description
Capacity	13 standard place settings
Energy Rating	A++ (Energy Efficient)
Noise Level	49 dB (Quiet Operation)
Wash Programs	6 programs including Intensive, Eco, and Quick wash
Delay Start	1-24 hour timer
Child Lock	Safety lock for control panel
AquaIntense Function	Extra spray for tough stains
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Half Load Option	Eco wash for fewer dishes
Display	Digital display with remaining time

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or standpipe (min height 40 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not bend or kink hoses. Ensure electrical socket is easily accessible.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport safety materials: Check interior for brackets or tapes.
Fill salt container: Use special dishwasher salt (approx. 1 kg).
Fill rinse aid dispenser: Fill to MAX line.
Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Only use salt and rinse aid designed for dishwashers.

Specifications

Model: DSN 1430 X
Type: Freestanding
Capacity: 13 place settings
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 10 liters per cycle (Eco program)
Programs: Intensive, Eco, Quick 30', Glass, Auto, Rinse
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V ~ 50Hz
Weight: 42 kg

Controls and Settings

Control Panel: POWER ON/OFF, Program Selection buttons, Delay Start, Child Lock, Start/Pause.

Program Guide:

Intensive: Heavily soiled pots/pans (75°C, 155 min)
Eco: Normally soiled dishes, energy saving (50°C, 195 min)
Quick 30': Lightly soiled, quick wash (55°C, 30 min)
Glass: Delicate glassware (40°C, 75 min)
Auto: Automatically adjusts to soil level (45-65°C, 105 min)
Rinse: Rinse only, no detergent (cold, 15 min)

Settings: Delay Start (1-24h), Child Lock (press and hold for 3 sec), Half Load option (Eco program only).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Pots, pans, lids, plates (facing center).
Upper basket: Glasses, cups, small plates, bowls.
Cutlery basket: Place knives (handles up), spoons/forks mixed.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Refer to loading diagrams on inner door for guidance.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Use powder, tablet, or gel in dispenser (main wash and pre-wash).
Select program: Press POWER, then choose program with selector button.
Optional settings: Set Delay Start if needed.
Start: Close door firmly, press START/PAUSE. Display shows remaining time.
After cycle: Wait for cycle end beep; open door slightly to let steam escape.

WARNING! Only use dishwasher-safe detergents. Do not open door during hot wash phases.

Care & Maintenance

Regular maintenance ensures longevity.

Filter cleaning: Twist and remove filter assembly weekly; rinse under tap.
Spray arms: Check monthly for blockages; clean holes with toothpick.
Door seal: Wipe with damp cloth to remove debris.
Exterior: Clean with mild soap and soft cloth.
Descaling: Run empty cycle with dishwasher cleaner every 2 months.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open door (hot surfaces).
Do not sit or stand on open door.
Disconnect power before servicing.

WARNING! Risk of electric shock if used improperly.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste disposal: Do not dispose with household waste. Use authorized collection points. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug, fuse, power; ensure door closed properly.
Poor cleaning results	Loading/detergent	Check spray arms not blocked; use correct detergent amount; clean filter.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure standpipe height correct.
Leaking water	Hoses/door seal	Tighten inlet/drain connections; check door seal for damage.
Unusual noise	Spray arm/foreign object	Check for items blocking spray arm; remove foreign objects from pump.
Salt/Rinse Aid indicator on	Low level	Refill salt container or rinse aid dispenser.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service. Do not attempt repairs yourself.