Beko Dishwasher DSN04210X Manual

The Beko DSN04210X is a freestanding dishwasher with a 10-place setting capacity, featuring an A++ energy rating, 5 wash programs, digital display, delay timer, child lock, and salt and rinse aid indicators. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, filter system, detergent dispenser, salt container, rinse aid dispenser.

Feature	Description
Capacity	10 place settings
Energy Rating	A++
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Auto
Digital Display	Shows program duration, remaining time, and status icons
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Half Load Option	Reduces water and energy for smaller loads
Acoustic Signal	Beeps when program finishes

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure stability.
Plug into grounded power outlet.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging inside baskets.
Fill salt container: Unscrew cap, add 1 kg of special dishwasher salt, then refill with water.
Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX mark.
Run empty wash: Select Intensive program without dishes to clean interior.

CAUTION! Only use salt and rinse aid designed for dishwashers.

Specifications

Type: Freestanding dishwasher.
Capacity: 10 place settings.
Energy Class: A++.
Water Consumption: Approx. 9 liters per cycle (Eco program).
Power Consumption: 0.78 kWh per cycle (Eco program).
Noise Level: 49 dB(A).
Programs: 5 main programs + options.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Control Panel: POWER button, Program selector, Delay Timer, Start/Pause, Half Load, Child Lock.

Programs: Intensive (70°C), Eco (50°C), Quick (45 min), Glass (40°C), Auto (sensor-controlled).

Settings: Delay Timer (1-24 hrs), Child Lock (press and hold Start for 3 sec), Acoustic Signal (can be turned off in settings). Display shows: selected program, remaining time, salt/rinse aid indicators, error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans (face center).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Place knives, forks, spoons with handles down.
Ensure spray arms can rotate freely.

Tip: Do not overload; leave space between items.

Using Wash Programs

Select program based on load type and soil level.

Add detergent: Use powder or tablets in dispenser (main wash + pre-wash).
Close door firmly.
Select program with rotary selector.
Set options if needed (Delay, Half Load).
Press Start/Pause to begin cycle.
Program ends with beep; open door slightly to let steam escape.

WARNING! Only open door after program ends or during pause to avoid hot steam.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter weekly: Remove lower basket, twist and lift out filter, rinse under tap.
Check spray arms monthly: Ensure holes are not clogged.
Wipe door seals: Use damp cloth to remove debris.
Descale periodically: Use dishwasher descaler every 2-3 months if in hard water area.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Beko Plc. For support, visit www.beko.com or contact local service center. Serial number located on rating plate inside door.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug and power; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Check loading; use correct amount of fresh detergent; clean filter.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height is correct.
Display shows error code	Various faults	Refer to manual error code list (e.g., E1 water inlet, E2 drain).
Noise during operation	Spray arm/items	Ensure spray arms rotate freely; check dishes are not touching arms.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; have model and serial numbers ready.