Beko Dishwasher DVN04321W Manual

The Beko DVN04321W is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and 48 dB noise level. It features 6 wash programs (including Intensive, Eco, and Quick), delay timer, child lock, half-load option, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Noise Level	48 dB
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, Auto, and Rinse
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Reduces water and energy for smaller loads
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Display	Digital display showing remaining time and program status

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Remove transit materials: Take out all polystyrene blocks and tape.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the appliance: Adjust feet until dishwasher is stable and level.
Plug into grounded power outlet.

WARNING! Only connect to cold water supply. Ensure electrical socket is easily accessible after installation.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew salt cap, fill with special dishwasher salt (first use: add 1 liter of water).
Fill rinse aid dispenser: Open dispenser lid, fill to MAX line, close securely.
Run empty wash: Select Intensive program without dishes to clean interior and remove manufacturing residues.
Set water hardness: Consult manual table; press and hold P1 and P3 buttons for 3 seconds, then use +/- to adjust.

CAUTION! Use only dishwasher salt in the softener. Never use table salt.

Specifications

Model: DVN04321W
Type: Freestanding
Capacity: 14 place settings
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 10.5 liters per cycle (Eco program)
Power Supply: 220-240 V, 50 Hz
Power Consumption: 1950 W
Dimensions (HxWxD): 85 x 60 x 60 cm
Net Weight: 44 kg
Programs: 6 main programs + 3 options

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Programs: Intensive (70°C), Eco (50°C), Quick (58°C, 30 min), Glass (40°C), Auto (45-65°C), Rinse (cold).

Options: Delay Start (1-24h), Half Load (for lower basket only), Child Lock (press and hold P2 for 3 sec). Display shows: selected program, remaining time, salt/rinse aid indicators, error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Upper basket: Cups, glasses, small plates, plastic items (face downward).
Lower basket: Plates, pots, pans (face inward, avoid blocking spray arms).
Cutlery basket: Place knives (handles up), spoons and forks mixed for separation.
Ensure items do not obstruct spray arms or detergent dispenser.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Detergents and Additives

Use only dishwasher-specific products.

Detergent: Fill main dispenser (compartment marked "Ⅹ") with powder or tablets. Use amount according to water hardness and soil level.
Rinse Aid: Automatically dispensed during final rinse. Adjust dosage level via dial inside dispenser (1=lowest, 6=highest).
Salt: Regenerates water softener. Refill when indicator light comes on.
Combined tablets: Can be used (place in main dispenser). Not suitable for very hard water areas.

WARNING! Do not use regular washing-up liquid. Keep detergents out of children's reach.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist and lift out filter assembly. Rinse under tap weekly.
Clean spray arms: Check for blockages, rinse holes.
Wipe door seals and interior: Use damp cloth with mild detergent.
Descale: Run empty with a dishwasher cleaner every 2 months if in hard water area.
Leave door slightly ajar after cycle to ventilate.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use.

Connect to properly grounded socket.
Do not open door during hot programs (risk of steam burns).
Keep children away from open dishwasher and detergents.
Only use accessories recommended by manufacturer.
Disconnect power before servicing.
Do not wash items soiled with flammable substances.

For UK: This appliance is fitted with a 13A plug. If replacing fuse, use 13A ASTA-approved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power supply, door not closed	Check plug socket; ensure door is firmly shut.
Water not entering	Tap closed, filter blocked	Open water tap; check inlet hose filter.
Poor washing results	Spray arms blocked, incorrect loading	Clean spray arms; rearrange dishes.
Water not draining	Drain hose kinked, filter clogged	Straighten hose; clean filter system.
Error code E1	Water inlet problem	Check water supply and inlet valve.
Error code E3	Heating issue	Check heating element; call service.
Salt indicator on	Salt container empty	Refill with dishwasher salt.
Rinse aid indicator on	Rinse aid low	Refill rinse aid dispenser.

Reset: Turn off at mains for 2 minutes, then restart.

Service: For persistent issues, contact Beko Customer Service: 0333 207 9710 (UK) or visit www.beko.co.uk