beko dishwasher DVN04X20 manual

The Beko DVN04X20 is a freestanding dishwasher with a 14-place setting capacity, featuring 7 wash programs, A++ energy rating, AquaIntense technology for improved cleaning, delay start function, child lock, half load option, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Inlet and drain hoses.

Feature	Description
AquaIntense Technology	Enhanced spray arm system for better cleaning performance
7 Wash Programs	Includes Intensive, Eco, Quick, Glass, etc.
Delay Start	Program start delay from 1 to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Half Load Option	Reduces water and energy consumption for smaller loads
Salt & Rinse Aid Indicators	LED indicators for refill reminders
A++ Energy Rating	High energy efficiency
14 Place Settings	Large capacity for standard dinnerware
Digital Display	Shows remaining time and program status
Acoustic Signal	Audible alert when program finishes

Installation

Unpack and inspect contents. Position near water supply and drain.

Connect water supply: Attach inlet hose to cold water tap (max temp 60°C).
Connect drain hose: Place in sink or connect to waste pipe (min height 40cm).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power outlet.

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1kg dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open dispenser lid, pour rinse aid up to MAX mark, close lid.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match your local water hardness level.

CAUTION! Only use dishwasher salt and rinse aid specifically designed for dishwashers.

Specifications

Model: DVN04X20
Type: Freestanding Dishwasher
Capacity: 14 place settings
Energy Rating: A++
Water Consumption: Approx. 9-12 liters per cycle (Eco program)
Power Consumption: Approx. 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V ~ 50Hz
Programs: 7 wash programs + 4 temperature options

Controls and Settings

Access programs via control panel. Power Button: Turns appliance on/off. Program Selector: Choose from 7 programs. Delay Start: Press to set delay (1-24 hours). Half Load: Reduces consumption for smaller loads. Start/Pause: Starts selected program or pauses operation. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Wash Programs: Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Delicate (40°C), Pre-Rinse (cold), Auto (45-65°C). Additional Functions: Extra Dry, Extra Quiet, Speed Plus.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans, and larger items.
Upper basket: For glasses, cups, saucers, and smaller dishes.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Ensure spray arms can rotate freely and items don't block detergent dispenser.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Fill main wash compartment with powder/liquid detergent or place tablet in dispenser.
Select program: Turn program selector to desired setting.
Start: Close door firmly and press Start/Pause button.
Program end: Acoustic signal sounds; open door slightly to improve drying.

WARNING! Only use detergents specifically designed for dishwashers. Do not open door during wash cycle.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filter system: Remove lower basket, twist and lift out filter, rinse under warm water weekly.
Clean spray arms: Remove and check for blockages in spray holes monthly.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months in hard water areas.
Exterior: Wipe with damp cloth and mild detergent; never use abrasive cleaners.

CAUTION! Unplug appliance before any maintenance. Never remove filter during operation.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of packaging materials. For support, visit www.beko.com or contact local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power supply; ensure door is closed properly; press Power button.
Poor cleaning results	Loading/detergent	Improve loading arrangement; use correct amount of fresh detergent; clean filter.
Water not draining	Drain hose/filter	Check drain hose for kinks; clean filter system; ensure drain height is correct.
Leaking water	Hoses/door seal	Tighten hose connections; check door seal for damage; ensure dishwasher is level.
Unusual noise	Spray arms/items	Check for items blocking spray arms; ensure spray arms rotate freely.
Salt/Rinse Aid lights on	Low levels	Refill salt container and/or rinse aid dispenser.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com