beko dishwasher DVN04X20S manual

The Beko DVN04X20S is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 12 washing programs including Eco, Intensive, and Quick Wash, digital display, delay timer, child lock, and AquaIntense technology for improved cleaning performance. It operates on 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Washing Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filter system, and AquaIntense spray arm.

Feature	Description
Capacity	14 standard place settings
Energy Rating	A++ (energy efficient)
Washing Programs	12 programs including Eco, Intensive, Quick 30'
Digital Display	Shows program duration, remaining time, and status
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
AquaIntense Technology	Enhanced spray system for better cleaning
Half Load Option	Eco wash for partial loads
Extra Dry Function	Improved drying performance
Water Softener	Adjustable for different water hardness levels

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the dishwasher: Adjust feet until unit is stable and level.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water connections are tight to prevent leaks. Use only recommended hoses.

First-Time Setup

Before first use, run an empty wash cycle with detergent.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of special dishwasher salt.
Fill rinse aid: Open dispenser, fill to MAX line, close securely.
Set water hardness: Use program buttons to set according to local water hardness (1-5).
Run initial cycle: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher-specific salt, detergent, and rinse aid.

Specifications

Model: DVN04X20S
Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Class: A++
Water Consumption: Approx. 10 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB (A)
Programs: 12 washing programs
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Start, Extra Dry, Half Load, Child Lock, Start/Pause.

Program Selection: Press program button repeatedly to cycle through options. Display shows program duration.

Settings: Water hardness (1-5), Rinse aid dosage (1-5), Buzzer on/off, Reset to factory defaults. Use combination button presses (POWER + Program 3 for 3 seconds) to access settings menu.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues before loading.
Upper basket: For glasses, cups, saucers, and small plates.
Lower basket: For plates, bowls, pots, and pans.
Cutlery basket: Place knives pointing down, spoons and forks mixed.
Ensure items don't block spray arms or detergent dispenser.

Tip: Load similar items together and face soiled surfaces toward spray arms.

Using Washing Programs

Select program based on soil level and dish type.

Eco: For normally soiled dishes, energy efficient (2h 55min).
Intensive: For heavily soiled pots and pans (1h 50min).
Quick 30': Lightly soiled dishes, 30-minute cycle.
Glass: Delicate program for glassware (1h 15min).
Auto: Automatically adjusts time/temp based on soil sensors.
Hygiene: High temperature for baby items and sterilization.
Add detergent: Fill main wash and pre-wash compartments.
Start: Close door firmly, press START/PAUSE.

WARNING! Do not open door during wash cycle; hot steam may escape.

Care & Maintenance

Regular maintenance ensures optimal performance.

Clean filter: Remove and rinse under water weekly.
Clean spray arms: Check for blockages monthly.
Descale: Use dishwasher cleaner every 2-3 months.
Exterior: Wipe with damp cloth; never use abrasive cleaners.
Check seals: Clean door gasket to prevent leaks.

CAUTION! Unplug before any maintenance. Never use sharp objects to clean spray arms.

Safety Information

Read all safety instructions before installation and use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open dishwasher (hot surfaces).
Only use dishwasher-specific detergents.
Disconnect power before servicing.
Do not sit or stand on open door.

Regulatory Information

CE marked according to EU directives. Complies with EN 50242, EN 60436, and EN 60704 standards. Energy label according to EU regulation 1059/2010. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power connection; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Improve loading; use correct amount of fresh detergent.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks or blockages.
Leaking water	Hoses/door seal	Tighten hose connections; clean and check door seal.
Unusual noise	Spray arm/items	Check for items blocking spray arm; ensure proper loading.
Display shows error code	Various faults	Refer to error code chart in manual; reset by turning power off/on.

Reset: Turn off at mains for 2 minutes, then restart.

Service: Contact authorized Beko service center; keep model number ready.