beko dishwasher DVN05320X manual

The Beko DVN05320X is a built-in dishwasher with a 12-place setting capacity, featuring multiple wash programs, energy efficiency class A, delay start function, half-load option, child lock, and water softener. It operates on 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filters, spray arms.

FeatureDescription
Wash ProgramsAuto, Intensive, Eco, Quick, Glass, Delicate
Capacity12 standard place settings
Energy ClassA (energy efficient)
Delay Start1-24 hours programmable delay
Half LoadOption for washing fewer dishes
Child LockSafety lock for control panel
Water SoftenerAdjustable for different water hardness
DisplayDigital with remaining time indicator
DryingCondensation drying system
Noise Level49 dB (quiet operation)

Installation

Unpack and inspect contents. Ensure proper water and electrical connections.

  1. Position dishwasher: Place in prepared cabinet space under countertop.
  2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  3. Connect drain hose: Route to sink drain or standpipe (min height 40 cm).
  4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  5. Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Take out all packaging from interior.
  2. Fill salt container: Add dishwasher salt to softener (first use requires 1.5kg).
  3. Fill rinse aid: Pour into dispenser until MAX indicator.
  4. Run initial cycle: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Adjust softener according to local water hardness.

CAUTION! Use only dishwasher salt, not table salt. Do not mix detergent and rinse aid.

Specifications

Controls and Settings

Control panel includes: Power button, Program selector, Delay Start, Half Load, Start/Pause, Child Lock.

Programs: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Delicate (40°C).

Options: Delay Start (1-24h), Half Load (for upper basket only), Extra Dry (increased drying time), Child Lock (press 3 sec to activate).

Indicator Lights: Salt warning, Rinse aid warning, Program progress, Door lock.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

  1. Scrape off large food residues before loading.
  2. Upper basket: Cups, glasses, small plates, plastic items.
  3. Lower basket: Plates, bowls, pots, pans.
  4. Cutlery basket: Knives, forks, spoons (handles down).
  5. Ensure items don't block spray arms or detergent dispenser.
  6. Load delicate items in upper basket only.

Tip: Place heavily soiled items facing center where water spray is strongest.

Using Wash Programs

Select program based on soil level and dish type.

  1. Add detergent: Fill main wash compartment (15-25g) and pre-wash if needed.
  2. Select program: Turn knob to desired program.
  3. Add options: Press Delay Start or Half Load if required.
  4. Start cycle: Close door and press Start/Pause.
  5. During cycle: Door locks automatically; display shows remaining time.
  6. After completion: Wait 2 minutes before opening to avoid steam.
  7. Unloading: Remove lower basket first to avoid dripping.

WARNING! Use only dishwasher detergent. Do not open door during hot wash phase.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Clean filters: Remove and rinse under water weekly.
  2. Clean spray arms: Check for blockages monthly.
  3. Check salt level: Refill when salt indicator lights.
  4. Check rinse aid: Refill when rinse aid indicator lights.
  5. Clean door seal: Wipe with damp cloth regularly.
  6. Run empty cycle: Monthly with dishwasher cleaner.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Important safety instructions for prevention of injury and damage.

Emergency: In case of leak, turn off water supply and disconnect power.

Regulatory Information

CE marked: Complies with European directives. Energy label: Class A according to EU regulation 1059/2010. Waste electrical products must not be disposed with household waste. Please dispose according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower supply/doorCheck power cord; ensure door closed properly; check child lock.
Poor cleaning resultsLoading/detergentCheck loading; use correct detergent amount; clean filters.
Water not drainingDrain hose/filterCheck drain hose for kinks; clean filter; ensure proper installation height.
Leaking waterDoor seal/hoseCheck door seal for damage; tighten hose connections; level the appliance.
Noise during operationSpray arm/itemsCheck for items touching spray arm; remove obstruction; secure baskets.
Salt indicator onLow saltRefill salt container; run short program to flush salt into softener.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service center. Keep model number ready.

beko dishwasher DVN05320X manual © - All Rights Reserved 2025