beko dishwasher DVN05C20W manual

The Beko DVN05C20W is a freestanding dishwasher with a 5-program capacity, A++ energy rating, and a stainless steel interior. It features a digital display, delay start, child lock, half-load option, and aqua-stop protection. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Program Selection 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, digital display, control panel.

Feature	Description
Energy Rating	A++ (Energy Efficient)
Programs	5 programs including Intensive, Eco, Quick, Glass, and Rinse
Capacity	Up to 13 place settings
Delay Start	Programmable delay from 1 to 24 hours
Child Lock	Safety lock to prevent accidental program changes
Half Load	Option for washing smaller loads efficiently
AquaStop	Leakage protection system
Digital Display	Shows remaining time, program, and status
Noise Level	49 dB (Quiet operation)
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks. Follow local plumbing codes.

First-Time Setup

Before first use, prepare the dishwasher.

Remove shipping materials: Check interior for any transit bolts or packaging.
Fill salt container: Use only dishwasher salt; fill until water overflows, then close tightly.
Fill rinse aid: Pour into designated dispenser; adjust setting (1-6) based on water hardness.
Run a maintenance cycle: Select the Intensive program without dishes to clean the interior.
Load detergent: Use only dishwasher detergents; fill main and pre-wash compartments as needed.

CAUTION! Use only products specified for dishwashers. Do not mix different detergent types.

Specifications

Model: DVN05C20W
Type: Freestanding Dishwasher
Energy Class: A++
Water Consumption: Approx. 11 liters per cycle (Eco program)
Power Consumption: 0.93 kWh per cycle (Eco program)
Programs: 5 (Intensive, Eco, Quick 45', Glass, Rinse)
Delay Start: 1-24 hours
Child Lock: Yes
Half Load Function: Yes
AquaStop Protection: Yes
Power Supply: 220-240V, 50Hz
Net Weight: 42 kg

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION knob, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Indicators: Program duration, delay time, salt warning, rinse aid warning, child lock icon.

Programs: Intensive (70°C, for heavily soiled), Eco (50°C, energy-saving), Quick 45' (45°C, light soil), Glass (40°C, delicate), Rinse (cold, for rinsing only). Settings: Adjust rinse aid dispenser (1-min, 6-max), salt consumption based on water hardness (set via internal dial).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; pre-rinsing is not necessary.
Lower basket: For pots, pans, plates, and larger items.
Upper basket: For glasses, cups, saucers, and smaller dishes.
Cutlery basket: Place knives, forks, spoons with handles down for safety.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Refer to loading diagrams in the manual for optimal arrangement. Place delicate items in the upper basket.

Program Selection

Select program based on soil level and dish type.

Turn on dishwasher: Press POWER.
Select program: Turn knob to desired program (see Specifications for details).
Optional settings: Press DELAY START to set timer; press HALF LOAD for smaller loads.
Add detergent: Ensure dispenser is filled.
Start: Close door firmly; press START/PAUSE. The display will show remaining time.
During cycle: You can pause by opening door or pressing START/PAUSE (wait a few seconds before resuming).
End of cycle: A beep will sound; dishes remain hot. Allow to cool before unloading.

WARNING! Do not open door during high-temperature cycles to avoid steam burns. Use child lock if children are present.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Filter cleaning: Remove and rinse coarse and fine filters under running water weekly.
Spray arms: Check for blockages; clean holes with a soft brush.
Door seal: Wipe with damp cloth to remove residue.
Exterior: Clean with mild detergent; avoid abrasive cleaners.
Descaling: Use dishwasher cleaner monthly if in hard water area.
Winterizing: If unused in freezing conditions, drain water supply.

CAUTION! Unplug before any maintenance. Do not use sharp objects to clean filters or spray arms.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of packaging material. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply, door not closed	Check plug/power; ensure door is firmly closed; child lock may be on.
Poor cleaning results	Loading, detergent, filters	Check loading; use fresh detergent; clean filters; ensure spray arms rotate freely.
Water not draining	Drain hose blockage, filter clog	Check drain hose for kinks; clean filter; ensure drain height is correct.
Leaking water	Door seal, hose connections	Check door seal for damage; ensure hoses are tight; inspect AquaStop system.
Unusual noise	Spray arm obstruction, loose items	Check for items blocking spray arms; ensure dishes are securely placed.
Salt/Rinse Aid indicators on	Low levels	Refill salt and/or rinse aid containers; reset indicators if needed.

Reset: Unplug for 5 minutes, then reconnect to reset electronic control.

Service: For persistent issues, contact authorized Beko service: www.beko.com/support.