beko dishwasher DVN06430W manual

The Beko DVN06430W is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 6 wash programs, a delay timer up to 24 hours, half-load option, and child lock. It includes a salt and rinse aid indicator, adjustable upper basket, and cutlery basket. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt and rinse aid compartments, water inlet and drain hoses.

FeatureDescription
Capacity14 place settings
Energy RatingA++
Wash Programs6 programs including Intensive, Eco, Quick, Glass, etc.
Delay TimerUp to 24 hours
Half-Load OptionFor washing smaller loads efficiently
Child LockPrevents accidental program changes
Salt & Rinse Aid IndicatorLED indicators for refill reminders
Adjustable Upper BasketHeight adjustable for taller items
Cutlery BasketRemovable basket for utensils
DisplayDigital display showing time and program status

Installation

Unpack and inspect contents. Ensure location is near water inlet, drain, and power outlet.

  1. Connect water inlet: Attach inlet hose to water tap (ensure filter is clean).
  2. Connect drain hose: Place hose into sink or drain pipe (use hose clip if required).
  3. Level the dishwasher: Adjust feet to ensure machine is level and stable.
  4. Plug into power outlet: Use grounded socket only.

WARNING! Ensure water and electrical connections are secure to prevent leaks or electrical hazards. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, unscrew salt cap, fill with dishwasher salt, replace cap.
  2. Fill rinse aid: Open rinse aid compartment, fill to MAX line, close.
  3. Run initial cycle: Select Intensive program without dishes to clean interior.
  4. Set water hardness: Use program buttons to set according to local water hardness (see manual).

CAUTION! Only use dishwasher salt and rinse aid specified for dishwashers. Do not use table salt.

Specifications

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Timer button, Half-Load button, Start/Pause button, Child Lock button.

Display: Shows selected program, remaining time, delay timer setting, and indicator icons (salt, rinse aid).

Program Selection: Press program button to cycle through options. Delay Timer: Press to set delay (1-24 hours). Half-Load: Activates half-load function for lower basket only. Child Lock: Press and hold for 3 seconds to activate/deactivate. Start/Pause: Starts selected program or pauses running cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: For plates, pots, pans. Place items facing center.
  3. Upper basket: For glasses, cups, small bowls. Adjust height if needed.
  4. Cutlery basket: Place utensils with handles down; mix types for separation.
  5. Ensure spray arms can rotate freely; do not block with large items.

Tip: Refer to loading diagrams in manual for optimal placement.

Using Wash Programs

Select program based on soil level and dish type.

  1. Intensive: For heavily soiled pots and pans (high temp, long cycle).
  2. Eco: For normally soiled dishes (energy efficient).
  3. Quick 45': For lightly soiled dishes, no drying.
  4. Glass: For delicate glassware (lower temperature).
  5. 90': For daily use, good cleaning with drying.
  6. Soak: For rinsing dishes to prevent drying before full load.

Add detergent to dispenser, close door, select program, press Start. Use Delay Timer if desired.

WARNING! Only use dishwasher detergent. Do not use regular soap.

Care & Maintenance

Regular maintenance ensures longevity.

  1. Clean filter: Remove lower basket, twist and lift out filter, rinse under water weekly.
  2. Check spray arms: Ensure holes are not clogged; remove and rinse if necessary.
  3. Wipe door seals: Use damp cloth to clean rubber seals.
  4. Descale: Run empty cycle with dishwasher cleaner monthly if in hard water area.
  5. Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects to clean spray arms.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorCheck power outlet; ensure door is closed properly; press Start.
Poor cleaning resultsLoading/detergentCheck loading; ensure spray arms rotate freely; use correct detergent amount.
Water not drainingFilter/drain hoseClean filter; check drain hose for kinks; ensure proper installation height.
Leaking waterHoses/door sealCheck inlet and drain hoses for tightness; inspect door seal for damage.
Unusual noiseSpray arms/dishesEnsure dishes are not blocking spray arms; check for foreign objects.
Salt/Rinse Aid indicator onLow levelRefill salt or rinse aid as needed.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com

beko dishwasher DVN06430W manual © - All Rights Reserved 2025