beko dishwasher DVS04X20W manual

The Beko DVS04X20W is a freestanding dishwasher with a 12-place setting capacity, featuring an A++ energy rating, 50 dB noise level, and multiple wash programs including Eco, Intensive, Auto, and Quick cycles. It includes a digital display, delay timer, child lock, half-load option, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filters, and spray arms.

Feature	Description
Energy Rating	A++ for high energy efficiency
Capacity	12 standard place settings
Noise Level	50 dB (quiet operation)
Wash Programs	Eco, Intensive, Auto, Quick, Glass, etc.
Digital Display	Shows program status and remaining time
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Reduces water and energy for smaller loads
Salt/Rinse Aid Indicators	Lights alert when refill is needed
AquaStop	Leak protection system

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure stability.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX mark, close lid.
Run empty wash: Select Intensive program without dishes to clean interior.
Load detergent: Use powder, tablets, or gel in dispenser as per program.

CAUTION! Use only dishwasher-specific salt and rinse aid. Do not mix with detergent.

Specifications

Model: Beko DVS04X20W
Type: Freestanding dishwasher
Capacity: 12 place settings
Energy Rating: A++
Water Consumption: Approx. 9.5 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 50 dB
Programs: Eco, Intensive, Auto, Quick (30 min), Glass, etc.
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz

Controls and Settings

Control Panel: ON/OFF button, program selection dial, digital display, delay timer button, child lock button, start/pause button.

Programs: Eco (energy-saving), Intensive (for heavily soiled), Auto (sensors adjust), Quick (30 min for lightly soiled), Glass (gentle for glassware).

Settings: Delay timer (1-24 hours), child lock (press for 3 seconds), half-load option (press during program selection). Display shows program duration, remaining time, and salt/rinse aid indicators.

Loading the Dishwasher

Upper basket: For glasses, cups, small plates. Lower basket: For plates, bowls, pots. Cutlery basket: For knives, forks, spoons.

Scrape off large food residues; no need to pre-rinse.
Load dishes facing center; ensure they do not block spray arms.
Place delicate items in upper basket; heavy items in lower basket.
Add detergent to dispenser (check program requirements).

Tip: Do not overload; leave space between items for water circulation.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press ON/OFF button.
Select program: Turn dial to desired program (Eco, Intensive, etc.).
Optional settings: Press delay timer or half-load if needed.
Start: Press start button; door locks automatically.
During cycle: Display shows remaining time; pause by opening door.
End: Beep sounds; display shows "End." Unload after 10 minutes for drying.

WARNING! Do not open door during hot cycles; steam may cause burns.

Care & Maintenance

Clean filters monthly: Remove lower basket, twist out filter assembly, rinse under water. Wipe door seals and interior with damp cloth. Use dishwasher cleaner every 2 months for descaling.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or sharp objects.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug; ensure door is closed properly; press ON/OFF.
Poor washing results	Loading/detergent	Reload dishes; check spray arms are not blocked; use correct detergent amount.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks; ensure height is correct.
Salt indicator on	Low salt	Refill salt container; run short program to reset.
Noise during cycle	Foreign objects	Check for items touching spray arms; remove debris from pump area.

Reset: Turn off for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com