beko dishwasher DVS05C20W manual

The Beko DVS05C20W is a 5-place setting freestanding dishwasher with an A++ energy rating, featuring 5 wash programs, a digital display, delay timer, half-load option, and child lock. It operates on 220-240V~ 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, filter system, salt and rinse aid dispensers.

FeatureDescription
Energy RatingA++ for energy efficiency
Capacity5 standard place settings
Wash Programs5 programs including Intensive, Eco, Quick
Digital DisplayShows remaining time and program status
Delay TimerProgram start delay up to 24 hours
Half Load OptionReduces water and energy for smaller loads
Child LockPrevents accidental program changes
Filter SystemEasy-clean triple filtration
Salt & Rinse AidSeparate dispensers for optimal washing
Dimensions (HxWxD)85cm x 60cm x 60cm

Installation

Unpack and inspect contents. Position near water supply and drain.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1MPa).
  2. Connect drain hose: Ensure proper height (40-100cm from floor) to prevent siphoning.
  3. Level the appliance: Adjust feet to ensure dishwasher is level and stable.
  4. Plug into grounded power outlet.

WARNING! Ensure water connections are tight to prevent leaks. Only use recommended hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Take out all packaging from interior.
  2. Fill salt dispenser: Add 1kg of dishwasher salt before first use (located at bottom).
  3. Fill rinse aid: Fill rinse aid dispenser to MAX line.
  4. Run empty wash: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher-specific salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Control Panel: POWER button, Program selector, Delay timer, Start/Pause, Half load, Child lock.

Program Selection: Turn knob to select desired wash program. Display shows duration.

Delay Timer: Press Delay button repeatedly to set start delay (3, 6, 9 hours).

Half Load: Press Half Load button when washing fewer dishes to save resources.

Child Lock: Press and hold Child Lock for 3 seconds to activate/deactivate.

Salt Refill Indicator: Red light near salt dispenser indicates when to refill salt.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues before loading.
  2. Lower basket: For plates, pots, pans. Adjustable rack height for taller items.
  3. Upper basket: For glasses, cups, saucers, small bowls.
  4. Cutlery basket: Place cutlery with handles down (except sharp knives).
  5. Ensure spray arms can rotate freely; no items blocking them.

Tip: Place heavily soiled items facing center where water spray is strongest.

Using Wash Programs

Select program based on soil level and dish type.

ProgramUse ForDurationTemp
IntensiveHeavily soiled pots, pans120 min70°C
EcoNormally soiled dishes (daily use)180 min50°C
Quick 30'Lightly soiled, quick wash30 min40°C
GlassGlassware, delicate items90 min40°C
SoakRinsing without drying15 minCold

To Start: Load dishes, add detergent, select program, press Start.

To Pause: Press Start/Pause to interrupt; press again to resume.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Clean filter: Remove and rinse filter weekly under running water.
  2. Check spray arms: Ensure holes are not clogged; rotate freely.
  3. Refill salt: When salt indicator lights, add dishwasher salt (approx. every 20 cycles).
  4. Refill rinse aid: Fill when level is low (dispenser holds 110ml).
  5. Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Never remove filter during operation.

Safety Information

Read all instructions before use.

Emergency: In case of leak, turn off water supply and unplug immediately.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower/doorCheck power connection; ensure door is properly closed.
Poor cleaning resultsLoading/detergentCheck loading; use correct amount of fresh detergent; clean filter.
Water not drainingDrain hose/filterCheck drain hose for kinks; clean filter; ensure proper installation height.
Salt indicator stays onSalt levelRefill salt dispenser; run short program to flush salt into softener.
Unusual noiseSpray arms/itemsCheck for items blocking spray arms; ensure dishes are properly loaded.
Water leakConnections/doorTighten water connections; check door seal for debris; level the appliance.

Reset: Unplug for 5 minutes, then restart.

Service: For persistent issues, contact Beko service: 0333 207 9710 or visit www.beko.co.uk

beko dishwasher DVS05C20W manual © - All Rights Reserved 2025