beko dishwasher DW 602 manual

The Beko DW 602 is a freestanding dishwasher designed for efficient cleaning with a 12-place setting capacity, featuring multiple wash programs, energy-saving options, delay start, and child lock. It operates on a standard 120V AC, 60Hz power supply. Below are key sections covering safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and lower baskets, Cutlery basket, Filter system, Detergent and rinse aid dispensers, Water inlet and drain hoses.

Feature	Description
Capacity	12 standard place settings
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, etc.
Delay Start	Programmable delay timer up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Saves water and energy for smaller loads
Display	LED indicators for program and status
Filter System	Easy-clean dual filtration
Energy Rating	Energy-efficient class A
Dimensions (HxWxD)	85cm x 60cm x 60cm
Water Connection	Standard 3/4 inch inlet hose

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water supply: Attach inlet hose to cold water tap using provided connector.
Connect drain hose: Place hose into sink or dedicated drain pipe, secure to prevent slipping.
Level the dishwasher: Adjust feet using a wrench to ensure machine is stable.
Plug into grounded power outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, run a wash cycle without dishes to clean interior.

Remove shipping materials: Take out all brackets and tapes inside.
Add salt (if applicable): Fill salt reservoir in bottom of tub (for models with water softener).
Fill rinse aid: Open dispenser, fill to MAX line, close securely.
Select program: Choose Intensive cycle, press Start.

CAUTION! Use only dishwasher detergents; hand soap can cause excess suds.

Specifications

Model: Beko DW 602
Type: Freestanding dishwasher
Capacity: 12 place settings
Programs: 6 (Intensive, Eco, Quick 30', Glass, 90', Soak)
Power Supply: 120V AC, 60Hz, 10A
Water Pressure: 0.5 - 10 bar
Noise Level: 49 dB
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 11 liters per cycle (Eco program)
Dimensions: 85 x 60 x 60 cm (HxWxD)

Controls and Settings

Control Panel: POWER, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Programs: Intensive (heavy soil), Eco (energy saving), Quick 30' (light soil), Glass (delicate), 90' (normal), Soak (pre-wash).

Settings: Delay Start (1-24 hours), Half Load (activates for smaller loads), Child Lock (hold Child Lock button for 3 seconds). Indicators: LED lights for program progress, salt/rinse aid refill alerts.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans. Place facing center, avoid blocking spray arms.
Upper basket: Cups, glasses, small bowls. Secure stemware in holders.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Add detergent: Use powder, tablet, or gel in main dispenser. For pre-wash, use compartment door.

Tip: Do not overload; ensure water can reach all surfaces.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Select program: Press corresponding button (e.g., Eco).
Add options: Press Delay Start if needed, then Half Load if applicable.
Start: Close door firmly, press Start/Pause. Cycle begins.
Pause/Stop: Press Start/Pause to interrupt; hold for 3 seconds to cancel.
End of cycle: Signal sounds; open door slightly to let steam escape.

WARNING! Do not open door during hot cycles; steam can cause burns.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Twist and lift out filter assembly weekly, rinse under tap.
Check spray arms: Ensure holes are not clogged; rotate freely.
Refill rinse aid: Indicator light shows when low; fill to MAX.
Descale: Run empty cycle with dishwasher cleaner every 2 months if in hard water area.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Keep filters clean to prevent poor washing.

Safety Features

Child Lock: Locks control panel. Overflow protection: Auto shut-off if water level too high. Door safety: Dishwasher stops if door opened during cycle. Thermal protection: Prevents overheating.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug; ensure door closed firmly; child lock off.
Poor cleaning results	Loading/filter/detergent	Reload properly; clean filter; use correct detergent amount.
Water not draining	Drain hose clogged	Check hose for kinks; clean filter; ensure drain height correct.
Leaking water	Hose connections/door seal	Tighten connections; check door seal for debris; level machine.
Unusual noise	Spray arm/dishes	Ensure spray arms not blocked; dishes not touching arms.
Error codes (e.g., E1, E2)	Water supply/drain issues	Refer to manual error code list; check inlet/outlet.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-944-9044; www.beko.com