Beko Dishwasher DW686 Manual

The Beko DW686 is a freestanding dishwasher featuring a 14-place setting capacity, A++ energy rating, 7 wash programs including Eco, Intensive, and Quick Wash, delay timer up to 24 hours, adjustable upper basket, half-load option, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control Panel, Spray Arms, Filter System, Detergent Dispenser, Salt Container, Rinse Aid Dispenser, Upper and Lower Baskets, Cutlery Basket.

Installation

Unpack and inspect contents. Ensure location is level, near water supply, drain, and power outlet.

1. Connect water inlet: Attach supplied hose to cold water tap (max pressure 1 MPa).
2. Connect drain hose: Place into sink or dedicated drain pipe (min height 40 cm).
3. Level the appliance: Adjust feet to ensure dishwasher is stable and door closes properly.
4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not use an extension cord. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without dishes to clean interior.

1. Fill salt container: Remove lower basket, unscrew cap, fill with special dishwasher salt (first use: add 1 liter of water).
2. Fill rinse aid dispenser: Open cap on door, fill to MAX line, close securely.
3. Load detergent: Use powder or tablet in main wash compartment of dispenser.
4. Select program: Turn program dial to "Intensive" and press Start.

CAUTION! Only use detergents and additives designed for dishwashers.

Specifications

• Model: DW686
• Type: Freestanding
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Capacity: 14 place settings
• Energy Class: A++
• Annual Energy Consumption: 237 kWh
• Water Consumption (Eco): 9.5 liters
• Noise Level: 49 dB
• Programs: Eco, Intensive, Auto, Quick 30', Delicate, Glass, Pre-Rinse
• Power Supply: 220-240V ~ 50Hz
• Max Inlet Pressure: 1 MPa (10 bar)

Controls and Settings

Control Panel: Program Dial, Start/Pause Button, Delay Timer Button, Half Load Button, Child Lock Button, Salt and Rinse Aid Indicator LEDs.

Program Selection: Turn dial to desired program (Eco for energy saving, Intensive for heavily soiled, Quick 30' for lightly soiled).

Delay Timer: Press Delay button repeatedly to set start time (1-24 hours).

Half Load: Press button when loading only one basket to save resources.

Child Lock: Press and hold for 3 seconds to activate/deactivate.

Loading the Dishwasher

For optimal cleaning, load dishes according to guidelines.

1. Scrape off large food residues (no need to pre-rinse).
2. Load lower basket: Pots, pans, plates, bowls (facing center).
3. Load upper basket: Glasses, cups, saucers, small bowls.
4. Cutlery basket: Place knives, forks, spoons with handles down (sharp points down for safety).
5. Adjust upper basket height if needed for taller items.
6. Ensure spray arms can rotate freely and are not blocked.

Tip: Do not overload. Place delicate items in upper basket away from heating element.

Using Detergents & Additives

Use only dishwasher-specific products.

1. Detergent: Fill main wash compartment (compartment "1") with powder or place one tablet. Use quantity as per detergent manufacturer's instructions and soil level.
2. Rinse Aid: Essential for spot-free drying. Fill dispenser on door interior. Adjust dosage via dial inside dispenser (1=lowest, 6=highest).
3. Salt: Required for water softening if water hardness >5°dH. Fill container in bottom of tub (only when salt indicator LED is on).

WARNING! Do not mix different detergent types (e.g., powder and tablet). Keep all products out of reach of children.

Care & Cleaning

Regular maintenance ensures longevity and performance.

1. Filter Cleaning: Twist and remove coarse and fine filters under lower spray arm. Rinse under running water weekly.
2. Spray Arms: Check holes for blockages and clean if necessary.
3. Door Seals: Wipe with damp cloth to remove food residue.
4. Exterior: Clean with soft, damp cloth and mild detergent. Do not use abrasive cleaners.
5. Monthly Cleaning: Run an empty cycle with a dishwasher cleaner or a cup of vinegar on the bottom rack to remove grease and limescale.

CAUTION! Unplug appliance before cleaning. Do not use steam cleaners.

Error Codes

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of packaging and appliance. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic control.

Service: For issues not resolved, contact authorized Beko service: www.beko.com/support.