Beko Dishwasher DWD5414W Manual

The Beko DWD5414W is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and 5 wash programs. It features a stainless steel interior, digital display, delay timer, child lock, half-load option, and salt/rinsing aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, digital control panel, water inlet/outlet hoses, and filters.

Feature	Description
Capacity	14 standard place settings
Energy Rating	A++ (Energy Efficient)
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Auto
Delay Timer	Up to 24-hour start delay
Child Lock	Safety lock for control panel
Half Load Option	Reduces water and energy for smaller loads
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Digital Display	Shows remaining time, program, and status
AquaStop	Leak protection system
Adjustable Upper Basket	Height adjustment for taller items

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the dishwasher: Adjust feet to ensure machine is stable and level.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks. Follow local plumbing codes.

First-Time Setup

Before first use, remove all packaging materials and prepare the dishwasher.

Fill salt dispenser: Open cap, add 1 kg of special dishwasher salt, then fill with water until it overflows.
Fill rinse aid dispenser: Open compartment, fill to MAX line with rinse aid.
Run empty wash: Select Intensive program without dishes to clean interior and remove manufacturing residues.
Set water hardness: Use program button combination to set level according to local water hardness (see manual chart).

CAUTION! Use only dishwasher salt in the salt dispenser. Never use table salt.

Specifications

Model: Beko DWD5414W
Type: Freestanding Dishwasher
Capacity: 14 place settings
Energy Class: A++
Water Consumption: Approx. 11 liters per cycle (Eco program)
Power Consumption: 0.95 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Max Inlet Water Pressure: 1 MPa (10 bar)
Min Inlet Water Pressure: 0.03 MPa (0.3 bar)

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Start (+/-), Half Load button, Start/Pause button, Child Lock button.

Programs: Intensive (70°C), Eco (50°C), Quick (45 min), Glass (40°C), Auto (sensor-controlled).

Settings: Use button combinations (hold Program + Delay for 3 seconds) to access service menu for water hardness, acoustic signal on/off, etc. Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues (no pre-rinsing required).
Load lower basket: Pots, pans, plates, and larger items. Ensure spray arm can rotate freely.
Load upper basket: Glasses, cups, saucers, and smaller plates. Use fold-down cup shelves.
Load cutlery basket: Place knives pointing down, spoons and forks mixed. Do not overload.
Adjust upper basket height: Lift baskets on both sides to higher position if needed for tall items.

Tip: Place heavily soiled items facing the center spray arm. Do not block the detergent dispenser.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main dispenser compartment with powder, tablet, or gel detergent just before starting cycle.
Rinse Aid: Fill dispenser to MAX line. Adjust dosage (1-6) via dial inside compartment for streak-free drying.
Salt: Only for models with water softener. Refill when salt indicator light illuminates.
Combined detergents (3-in-1): Can be used if compatible with your water hardness. Follow package instructions.

WARNING! Never use regular washing-up liquid. Store detergents in a cool, dry place out of children's reach.

Care & Cleaning

Regular maintenance ensures longevity and performance.

Clean filters: Remove lower basket, twist and lift out coarse and fine filters. Rinse under warm water weekly.
Clean spray arms: Remove by unscrewing the retaining nut. Check for blockages in holes.
Wipe door seals: Use damp cloth to remove food residues and prevent odors.
Clean interior: Run empty wash with a dishwasher cleaner or cup of vinegar monthly to remove limescale and grease.
Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.

CAUTION! Unplug machine before cleaning filters. Do not operate without filters installed.

Safety Features

Child Lock: Locks control panel to prevent accidental program changes. AquaStop: Monitors water flow; automatically cuts off water supply if a leak is detected in the inlet hose. Door Safety: Dishwasher stops if door is opened during operation. Thermal Cut-out: Prevents overheating.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Use authorized collection points. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check plug, fuse, and power supply. Ensure door is closed properly. Check if Child Lock is activated.
No water intake	Tap, filter, inlet hose	Ensure water tap is fully open. Check inlet hose for kinks. Clean inlet filter.
Poor washing results	Loading, detergent, spray arms	Check loading instructions. Use correct amount of fresh detergent. Clean filters and spray arm jets.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks or blockage. Clean filters. Ensure drain hose height is correct (40-100 cm).
Error codes (e.g., E1, E2)	Water intake/drain issues	E1: Water intake fault. Check tap and hose. E2: Drain fault. Check drain hose and filter. Unplug for 5 mins, then retry.
Salt indicator light on	Salt level low	Refill salt dispenser with dishwasher salt.
Rinse aid indicator light on	Rinse aid level low	Refill rinse aid dispenser.
Unusual noise	Spray arm, foreign objects	Check for items touching spray arms. Remove any foreign objects (bones, pits) from pump area.

Reset: Unplug for 5 minutes to reset electronic control. For persistent errors, contact service.

Service: Consult your local Beko service center or visit www.beko.com for support.