Beko Dishwasher FGS310 Manual

The Beko FGS310 is a freestanding dishwasher with a 12-place setting capacity, featuring 6 wash programs, A++ energy rating, 49 dB noise level, half-load option, delay timer up to 24 hours, child lock, and salt/rinse aid indicators. This manual covers safety instructions, installation, program selection, daily use, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

FeatureDescription
Wash Programs6 programs including Intensive, Eco, Quick, Glass, 90 Minute, and Rinse
Capacity12 standard place settings
Energy RatingA++ (Energy efficient)
Noise Level49 dB (Quiet operation)
Half Load OptionEco wash for fewer dishes
Delay TimerProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Salt & Rinse Aid IndicatorsLED alerts for refilling
DisplayDigital display showing time and status
Dimensions (HxWxD)85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level, near water/drain connections.

  1. Position dishwasher: Place on stable, level floor near sink.
  2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  3. Connect drain hose: Secure to sink or waste pipe (min height 40 cm).
  4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  5. Adjust feet: Level the appliance using adjustable front feet.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

  1. Remove transport materials: Take out all interior packaging and transit bolts.
  2. Fill salt container: Add 1 kg of special dishwasher salt (first use requires water filling).
  3. Fill rinse aid: Pour into dispenser (max level marked).
  4. Run empty wash: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Adjust dial inside salt container according to local water hardness.

CAUTION! Only use dishwasher salt and rinse aid designed for dishwashers.

Specifications

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Timer, Half Load, Start/Pause, Child Lock.

Program Guide:

ProgramTemp (°C)TimeUse For
Intensive70155 minHeavily soiled pots/pans
Eco50200 minNormally soiled dishes (energy saving)
Quick4530 minLightly soiled, quick wash
Glass4085 minGlassware, delicate items
90 Minute6590 minDaily wash, balanced
RinseCold15 minRinse only, no detergent

Additional Functions: Delay Timer (1-24 hours), Half Load (reduces water use), Child Lock (press and hold Start for 3 seconds).

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

  1. Scrape off large food residues before loading.
  2. Lower basket: Plates, bowls, pots, pans (face center, avoid nesting).
  3. Upper basket: Glasses, cups, saucers, small bowls (angled downward).
  4. Cutlery basket: Place knives (blades down), spoons/forks mixed for separation.
  5. Ensure spray arms rotate freely; no items blocking them.
  6. Plastic items on upper rack only (away from heating element).

Tip: Refer to loading diagrams on inner door for optimal arrangement.

Using Detergents & Additives

Use only dishwasher-specific products.

  1. Detergent: Fill main dispenser (15-25 g for normal soil). Use tablets/powder/gel.
  2. Rinse Aid: Fill dispenser until MAX indicator; adjust dosage (1-6) via dial.
  3. Salt: Fill salt container when indicator light comes on (only for models with water softener).
  4. Pre-wash: For heavily soiled loads, add small amount to pre-wash chamber.

WARNING! Do not use regular washing-up liquid; it causes excessive suds.

Care & Maintenance

Regular maintenance ensures longevity and performance.

  1. Clean filter: Remove and rinse under water weekly.
  2. Clean spray arms: Check for blockages monthly.
  3. Descale: Run empty with dishwasher cleaner every 2 months.
  4. Wipe door seals: Clean with damp cloth to prevent leaks.
  5. Check drain hose: Ensure no kinks or blockages.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Locks control panel (activate by holding Start 3 seconds). Door Safety: Automatically stops if door opened during cycle. Overflow Protection: Float switch stops water if detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE marked. Complies with EU directives for safety (EN 60335-1, EN 60335-2-5) and electromagnetic compatibility (EN 55014-1, EN 55014-2). Energy label according to EU regulation 1059/2010. Waste disposal: Follow local regulations for WEEE. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower/doorCheck plug, fuse, power; ensure door closed properly.
Poor cleaning resultsLoading/detergentImprove loading; use correct amount of fresh detergent; clean filter.
Water not drainingDrain hose/filterCheck hose for kinks; clean filter; ensure drain height correct.
Leaking waterDoor seal/hoseCheck door seal for debris; tighten hose connections; level appliance.
Noise during operationSpray arm/itemsEnsure spray arms rotate freely; check for items touching spray arm.
Salt/Rinse Aid light onLow levelRefill salt container or rinse aid dispenser.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com

Beko Dishwasher FGS310 Manual © - All Rights Reserved 2025