Beko Dishwasher Repair Manual

The Beko Dishwasher is a reliable household appliance designed for efficient cleaning and drying of dishes. This manual covers essential safety guidelines, common features, installation steps, operational instructions, maintenance procedures, and troubleshooting tips for various Beko dishwasher models. Below are key sections to help you understand, operate, and repair your dishwasher effectively.

Features at a Glance

Key components: Control panel, Spray arms, Filter system, Detergent dispenser, Heating element, Door latch, Drain pump, Water inlet valve.

Installation Guidelines

Unpack and inspect contents. Ensure location is level and near water/drain connections.

1. Position dishwasher: Place in designated space under counter or freestanding.
2. Connect water supply: Attach inlet hose to hot water line (recommended) or cold water line.
3. Connect drain hose: Route to sink drain or garbage disposal; ensure no kinks.
4. Electrical connection: Plug into grounded 120V AC outlet (do not use extension cord).
5. Level the unit: Adjust feet to ensure dishwasher is stable and door closes properly.

WARNING! Ensure water and electrical connections are secure to prevent leaks or electrical hazards. Follow local plumbing and electrical codes.

First-Time Setup

Before first use, run a rinse cycle to clean interior.

1. Remove shipping materials: Take out any brackets or tape inside tub.
2. Load detergent: Fill detergent dispenser with dishwasher detergent (not regular soap).
3. Add rinse aid: Fill rinse aid dispenser if model includes it.
4. Run initial cycle: Select rinse or quick wash cycle without dishes to flush system.
5. Set preferences: Adjust water hardness setting if available; enable child lock if needed.

CAUTION! Use only detergents designed for dishwashers. Do not overfill dispensers.

Specifications

• Capacity: Standard 12-14 place settings (varies by model).
• Water Connection: Hot water recommended (120°F/49°C) or cold water adaptable.
• Power Requirements: 120V AC, 60Hz, 15A circuit.
• Wash Cycles: Normal, Heavy, Eco, Quick, Rinse, Delicate.
• Drying Options: Heat dry, Air dry, or Fan dry (model dependent).
• Noise Level: Typically 49-52 dB (quiet operation).
• Dimensions: Standard under-counter: 24" W x 24" D x 35" H (approx).
• Weight: 70-90 lbs (empty).

Controls and Settings

Access settings via control panel buttons or dial. Common buttons: POWER, START/PAUSE, CYCLE SELECT, OPTIONS (e.g., Hi-Temp, Sanitize), DELAY START, CHILD LOCK.

Cycle Guide: Normal (everyday dishes), Heavy (pots/pans), Eco (energy saving), Quick (lightly soiled), Rinse (rinse only), Delicate (glassware).

Options: Hi-Temp wash for better cleaning, Sanitize for high-temperature rinse, Extra Dry for enhanced drying, Half Load for smaller loads. Settings: Water hardness adjustment, Rinse aid dosage control, Sound on/off (beeps), Reset to factory defaults.

Connecting Water & Drain

Proper connections ensure efficient operation and prevent leaks.

1. Turn off water supply and electricity before connecting.
2. Connect inlet hose: Use supplied hose; attach to water supply valve with washer.
3. Connect drain hose: Loop high under sink (air gap) to prevent backflow.
4. Secure hoses: Use clamps; avoid sharp bends or kinks.
5. Check for leaks: Turn on water; inspect connections before running dishwasher.

Tip: Install a water hammer arrestor if water hammer occurs during fill cycles.

Operating Cycles

Follow loading guidelines for optimal cleaning.

1. Load dishes: Scrape off large food particles; place dishes facing spray arms.
2. Add detergent: Use recommended amount based on water hardness and soil level.
3. Select cycle: Choose based on load type (e.g., Heavy for pots).
4. Add options: Select Hi-Temp, Sanitize, or Extra Dry as needed.
5. Start: Close door securely; press START; dishwasher will begin fill cycle.
6. Pause/stop: Press START/PAUSE to interrupt; open door to stop (some models).
7. Unload: Wait for cycle to complete; allow dishes to cool if heat dry used.

WARNING! Do not open door during hot wash or dry cycles to avoid steam burns.

Maintenance & Cleaning

Regular maintenance ensures longevity and performance.

• Clean filter: Remove and rinse filter weekly under running water.
• Clean spray arms: Check for clogs; remove debris from holes.
• Wipe door gasket: Clean with damp cloth to prevent mold.
• Descale: Run empty cycle with dishwasher cleaner monthly if hard water.
• Check rinse aid: Refill when indicator light comes on.

CAUTION! Unplug dishwasher before cleaning interior components. Do not use abrasive cleaners.

Safety Information

Important safety precautions to prevent injury or damage.

• Disconnect power before servicing or cleaning.
• Do not tamper with door latch or safety switch.
• Use only detergents and rinse aids designed for dishwashers.
• Keep children away from open dishwasher during or after cycles (hot surfaces).
• Do not wash items that are not dishwasher-safe (e.g., wood, cast iron).

WARNING! Risk of electric shock if opened while powered. If malfunction occurs, disconnect power and contact qualified technician.

Regulatory Information

Complies with NSF/ANSI 184 for residential dishwashers. Energy Star certified on eligible models. Manufactured by Beko (Arçelik A.Ş.). For support, visit www.bekousa.com or contact 1-877-461-7356. This appliance meets applicable safety standards; do not modify or repair except as instructed in this manual.

Troubleshooting

Reset: Turn off power at circuit breaker for 1 minute, then restore.

Service: 1-877-461-7356; www.bekousa.com