Beko Dishwasher User Manual

The Beko Dishwasher is a modern, energy-efficient appliance designed for convenient and thorough cleaning of dishes, cutlery, and cookware. It features multiple wash programs, adjustable racks, delay start, child lock, and various sensors for optimal performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control Panel, Upper and Lower Racks, Cutlery Basket, Filter System, Detergent Dispenser, Rinse Aid Dispenser, Water Inlet, Drain Hose.

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

1. Connect water supply: Attach inlet hose to cold water tap using supplied connector.
2. Connect drain hose: Place hose into sink or dedicated drain pipe (max height 1m).
3. Level the dishwasher: Adjust feet using a wrench to ensure stability.
4. Plug into grounded electrical outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, run an empty cycle to clean interior.

1. Remove shipping materials: Take out all tapes and blocks from interior.
2. Fill rinse aid: Open dispenser, fill to MAX line, close securely.
3. Add salt (if applicable): Fill softener unit with water first, then salt.
4. Run initial cycle: Select Intensive program without dishes to clean interior.
5. Set preferences: Adjust language, acoustic signal, and default program via settings.

CAUTION! Use only dishwasher-specific detergents and rinse aids.

Specifications

• Capacity: 12 place settings standard.
• Energy Rating: A+++ (most efficient).
• Water Consumption: Approx. 9-12 liters per cycle (Eco program).
• Power Supply: 220-240V AC, 50Hz.
• Noise Level: 49 dB (quiet operation).
• Dimensions (HxWxD): 85cm x 60cm x 60cm.
• Programs: Auto, Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Rinse.
• Special Features: Delay start, child lock, half load, acoustic signal.
• Inlet Water Pressure: 0.5 - 10 bar.

Controls and Settings

Access settings via control panel buttons and digital display.

Buttons: POWER, PROGRAM SELECTION, DELAY START, CHILD LOCK, START/PAUSE, HALF LOAD.

Program Selection: Auto (sensor-based), Intensive (tough stains), Eco (energy saving), Quick (light soil), Glass (fragile), Rinse (no detergent). Settings: Language selection, acoustic signal on/off, default program, rinse aid level adjustment, water hardness setting. Display: Shows program time remaining, current program, delay start hours, error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

1. Scrape off large food residues; no pre-rinsing required.
2. Lower rack: Place plates, pots, pans facing center; ensure spray arms can rotate freely.
3. Upper rack: Place glasses, cups, bowls; adjust height if needed for taller items.
4. Cutlery basket: Place utensils with handles down; separate silverware to prevent nesting.
5. Add detergent: Fill main compartment with powder/tablet; use pre-wash for heavily soiled loads.

Tip: Do not overload; leave space between items for water circulation.

Using Wash Programs

Select program based on load type and soil level.

1. Auto: Sensors adjust water, temperature, time (daily use).
2. Intensive: High temperature for pots, pans, baked-on food.
3. Eco: Energy-efficient for normally soiled dishes.
4. Quick: 30-minute cycle for lightly soiled, pre-rinsed items.
5. Glass: Gentle wash for crystal and delicate glassware.
6. Rinse: Short rinse without detergent (for delayed unloading).
7. Delay Start: Press DELAY button to set start time (1-24 hours).
8. Start/Pause: Press to begin cycle; press again to pause.

WARNING! Do not open door during hot wash phases; steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity and performance.

1. Clean filters: Remove and rinse under warm water weekly.
2. Check spray arms: Ensure holes are not clogged; rotate freely.
3. Wipe door seals: Clean with damp cloth to prevent mold.
4. Descale: Run empty cycle with dishwasher cleaner monthly if in hard water area.
5. Exterior: Clean with mild detergent; avoid abrasives.

CAUTION! Unplug before any maintenance. Do not use sharp objects on filters.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to disable controls. Door Safety: Door locks during wash; unlocks automatically at end of cycle or when paused. Overflow Protection: Float switch stops water intake if detected. Leak Detection: Some models have leak sensors that stop operation.

Regulatory Information

CE marked: Complies with EU safety and environmental directives. WEEE Directive: Do not dispose with household waste; recycle at designated facility. Energy Label: Rated A+++ per EU regulation 2019/2017. For support, visit www.beko.com or contact local service center. Serial number located on door edge or rating plate.

Troubleshooting

Reset: Turn off at mains for 2 minutes, then restart.

Service: Contact authorized Beko service; have model and serial numbers ready.