Beko Dryer DTKCE80021W User Manual

The Beko DTKCE80021W is a 8kg heat pump tumble dryer with A+++ energy rating, featuring SensorDry technology, multiple drying programs, child lock, anti-crease function, and reversible door. Designed for household use, it offers efficient drying with low energy consumption. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heat pump system, LED display, control panel, lint filter, reversible door, water container.

FeatureDescription
SensorDry technologyAutomatically detects moisture levels for optimal drying
Heat pump systemEnergy-efficient drying with A+++ rating
8kg capacitySuitable for family-sized loads
Multiple programsCotton, synthetic, delicate, wool, quick dry
Anti-crease functionReduces wrinkles by tumbling without heat
Child lockPrevents accidental program changes
Reversible doorCan be hinged left or right for installation flexibility
LED displayShows remaining time, program status, and alerts
Lint filterRemovable filter for easy cleaning
Water containerCollects condensed water; full indicator light

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Position dryer: Ensure at least 5cm clearance at sides and back for ventilation.
  3. Adjust feet: Turn leveling feet to stabilize; use spirit level to check.
  4. Connect to exhaust: Attach vent hose to rear outlet (optional for vented operation).
  5. Plug into grounded power outlet.

WARNING! Dryer is heavy; use two people for lifting. Ensure transit bolts are removed before use.

First-Time Setup

Power on dryer; follow initial setup steps.

  1. Select language: Press and hold START/PAUSE for 3 seconds to choose language.
  2. Empty water container: Ensure container is empty and correctly inserted.
  3. Clean lint filter: Remove, clean under tap, dry, and reinsert.
  4. Run calibration cycle: Select Cotton program and run empty for 20 minutes.
  5. Set door direction: Reverse door if needed using hinge kit (optional).

CAUTION! Do not use without removing transit bolts. Ensure proper ventilation.

Specifications

Controls and Settings

Access programs via rotary dial and touch buttons. Display shows time, status, and alerts.

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR (rotary dial), OPTIONS (Anti-crease, Child Lock, Delay Start), SENSORDRY button.

Programs: COTTON (high heat), SYNTHETIC (medium heat), DELICATE (low heat), WOOL (wool-safe), QUICK DRY (30 min), ANTI-CREASE (tumble only). Options: Delay start (1-24 hours), Child lock (press and hold 3 seconds), Anti-crease (select after cycle). Display: Remaining time, program indicator, water container full alert, filter clean reminder.

Connecting to Power

Use dedicated grounded outlet. Do not use extension cord.

  1. Ensure power matches dryer rating (220-240V, 50Hz).
  2. Plug directly into wall outlet; ensure plug is fully inserted.
  3. Check power light on control panel illuminates.

Tip: Have a qualified electrician install outlet if needed. Ensure proper grounding.

Using Drying Programs

Supports various fabric types with SensorDry auto-adjustment.

  1. Load laundry: Do not exceed 8kg; distribute evenly.
  2. Select program: Turn dial to desired program (e.g., Cotton).
  3. Set options: Press OPTIONS for Anti-crease, Delay Start if needed.
  4. Start: Press START/PAUSE; dryer will begin cycle.
  5. Monitor: Display shows remaining time; SensorDry adjusts as needed.
  6. End of cycle: Buzzer sounds; remove laundry promptly.
  7. Clean filter: After each cycle, remove and clean lint filter.
  8. Empty water container: Check after each cycle; empty when full.

WARNING! Do not dry rubber, plastic, or foam items. Clean filter regularly to prevent fire risk.

Maintenance & Cleaning

Unplug before maintenance. Regular cleaning ensures efficiency and safety.

CAUTION! Never operate without lint filter. Do not use solvents or scouring agents.

Safety Features

Child Lock: Press and hold OPTIONS for 3 seconds to lock controls. Overheat protection: Automatically shuts off if temperature exceeds safe limit. Door safety switch: Stops drum when door is opened. Water container full alert: Light indicates when container needs emptying.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. Manufactured by Beko PLC. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Dryer won't startPower/doorCheck power outlet; ensure door is fully closed; press START/PAUSE.
No heatFilter/ventClean lint filter; check exhaust vent for blockages.
Laundry still dampOverload/settingsReduce load size; select appropriate program; ensure SensorDry is on.
Unusual noiseObjects/installationCheck for coins/objects in drum; ensure dryer is level on floor.
Water container full lightContainer fullEmpty water container; reinsert correctly.
Error code E1Sensor faultUnplug for 5 minutes; restart. If persists, contact service.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 0333 207 9710; www.beko.com

Beko Dryer DTKCE80021W User Manual © - All Rights Reserved 2025