Beko Dryer User Manual

The Beko Dryer is a high-efficiency tumble dryer designed for home use, featuring multiple drying programs, heat settings, and safety functions. It includes a condenser system, lint filter, child lock, delay start, and end-of-cycle signal. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Drum, Lint filter, Condenser unit, Power cord, Door with safety lock.

Feature	Description
Control Panel	Program selector, start/pause button, temperature settings
Drum Capacity	7 kg (15.4 lbs) dry laundry capacity
Lint Filter	Removable filter for collecting lint
Condenser System	Recycles moisture; no external venting required
Child Lock	Prevents accidental program changes
Delay Start	Set drying to begin later (up to 24 hours)
End Signal	Audible alert when cycle completes
Anti-Crease	Tumbles periodically after cycle to reduce wrinkles
Energy Rating	A++ energy efficiency class
Door Safety Lock	Auto-locks during operation; unlocks when cool

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Use wrench to remove bolts at rear; keep for future moves.
Position dryer: Ensure 5 cm clearance at back and sides for ventilation.
Level the appliance: Adjust feet until dryer is stable and does not rock.
Connect to power: Plug into grounded 220-240V, 50Hz outlet (do not use extension cord).

WARNING! Dryer is heavy; lift with care using two people. Ensure transit bolts are removed before use.

First-Time Setup

Before first use, run an empty drying cycle to remove manufacturing residues.

Clean lint filter: Remove, rinse under water, dry, and reinsert.
Select program: Turn selector to "Cottons" at high temperature.
Start cycle: Press start button; let run for 30 minutes, then cancel.
Set preferences: Use control panel to adjust signal volume, child lock, etc.

CAUTION! Ensure dryer is empty and lint filter is clean before first cycle.

Specifications

Model Series: Beko Condenser Dryer.
Capacity: 7 kg (15.4 lbs).
Programs: Cottons, Synthetics, Delicates, Quick Dry, Anti-Crease, Wool.
Heat Settings: High, Low, Cool Air (no heat).
Power Supply: 220-240V AC, 50Hz.
Dimensions (HxWxD): 85 cm x 60 cm x 60 cm.
Weight: 45 kg (99 lbs).
Energy Consumption: 2.5 kWh per standard cotton cycle.
Noise Level: 65 dB(A).

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Temperature button, Delay Start button, Child Lock button, Signal Off button.

Programs: Cottons (high heat), Synthetics (medium heat), Delicates (low heat), Quick Dry (30 min), Anti-Crease, Wool (gentle). Temperature: High, Low, Cool Air. Options: Delay Start (1-24 hrs), Child Lock (press 3 sec), End Signal On/Off.

Display: Shows remaining time, program, and options selected.

Connecting to Power

Use dedicated grounded outlet; ensure voltage matches rating plate.

Turn off power at mains before plugging in.
Plug cord firmly into outlet.
Do not use adapters or extension cords.
Ensure outlet is easily accessible for disconnection.

Tip: Have a qualified electrician check wiring if unsure.

Using Drying Programs

Supports various fabrics and dryness levels.

Load laundry: Do not overload; ensure items are spun-dry first.
Select program: Turn knob to desired program (e.g., Cottons for towels).
Set temperature: Press Temperature button to choose heat level.
Add options: Press Delay Start if needed; press Child Lock to activate.
Start: Press Start/Pause; display shows remaining time.
Pause/Stop: Press Start/Pause to pause; turn knob to Off to cancel.
Unload: When cycle ends, remove laundry promptly to avoid wrinkles.
Clean lint filter after every cycle.

WARNING! Do not dry rubber, plastic, or foam items; risk of fire.

Safety Features

Child Lock: Press and hold button 3 seconds to lock controls. Door Safety Lock: Auto-locks when drum is hot; unlocks when cool. Overheat Protection: Cuts power if temperature exceeds safe limit. Lint Filter Alert: Reminder to clean filter after each cycle.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean lint filter after every use. Condenser unit: Clean every 3 months under running water.

CAUTION! Do not use abrasive cleaners; never pour water into dryer.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label: A++ rating. Copyright © Beko plc; trademarks of Arçelik A.Ş. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Door not closed/power	Close door firmly; check power outlet; ensure child lock is off.
No heat	Temperature setting	Check if Cool Air is selected; change to High or Low heat.
Laundry still damp	Overloaded/filter	Reduce load size; clean lint filter; ensure spin speed was high.
Unusual noise	Foreign objects	Check drum for coins, buttons; ensure transit bolts removed.
Error code E1	Sensor fault	Unplug for 5 minutes, restart; if persists, call service.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com