beko dvn05320w manuale istruzioni

The Beko DVN05320W is a 5.3 cubic foot condenser dryer with heat pump technology, featuring energy efficiency class A+++, multiple drying programs, anti-crease function, child lock, LED display, and end-of-cycle signal. Designed for 120V AC, 60Hz operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heat pump condenser unit, LED control panel, lint filter, water tank, reversible door, and adjustable feet.

Feature	Description
Heat Pump Technology	Energy-efficient drying with A+++ rating
Capacity	5.3 cubic feet (15 kg)
Drying Programs	Multiple programs for different fabric types
Anti-Crease Function	Reduces wrinkles at end of cycle
Child Lock	Prevents accidental program changes
LED Display	Shows remaining time and program status
Reversible Door	Can be hinged left or right
Water Tank	Collects condensed water; full indicator
Lint Filter	Removable for easy cleaning
End-of-Cycle Signal	Audible alert when drying is complete

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Use wrench to remove bolts from rear panel.
Adjust feet: Turn feet to level the dryer; ensure it does not rock.
Connect venting (if required): Attach vent hose to exhaust port.
Connect to power: Plug into dedicated 120V outlet.
Check water tank: Ensure tank is properly inserted.

WARNING! Dryer is heavy; use two people for lifting. Ensure transit bolts are removed before operation.

First-Time Setup

After installation, perform initial setup.

Power on: Plug in and press POWER button.
Select language: Use SETTINGS menu to choose display language.
Run empty cycle: Select COTTONS program and run for 20 minutes to remove manufacturing residues.
Set preferences: Configure end signal volume, child lock, etc.

CAUTION! Ensure dryer is level and water tank is empty before first use.

Specifications

Model: DVN05320W
Type: Condenser Dryer with Heat Pump
Capacity: 5.3 cu ft (15 kg)
Energy Class: A+++
Programs: Cottons, Synthetics, Delicates, Quick Dry, Anti-Crease
Power Supply: 120V AC, 60Hz
Dimensions (HxWxD): 85 x 60 x 62 cm
Weight: 45 kg
Noise Level: 65 dB(A)
Water Tank Capacity: 4.5 liters

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS (Anti-Crease, Child Lock), TIME DELAY.

LED Display: Shows selected program, remaining time, and status icons.

Programs: Cottons (high heat), Synthetics (medium heat), Delicates (low heat), Quick Dry (30 min), Anti-Crease (tumble without heat). Settings: Child Lock (press and hold OPTIONS for 3 sec), End Signal volume (High/Low/Off), Time Delay (1-24 hours).

Connecting to Power

Use dedicated 120V outlet; do not use extension cord.

Ensure dryer is off and unplugged.
Plug power cord directly into grounded outlet.
Ensure outlet matches dryer voltage requirements.

Tip: Check local electrical codes; recommended circuit: 15A.

Using Drying Programs

Select program based on fabric type.

Load laundry: Do not exceed max capacity.
Select program: Turn PROGRAM SELECTOR knob.
Set options: Press OPTIONS for Anti-Crease or Time Delay.
Start: Press START/PAUSE.
Monitor: LED shows remaining time.
Unload promptly: Remove laundry when cycle ends to reduce wrinkling.
Clean lint filter: After each cycle.

WARNING! Do not dry rubber, plastic, or flammable items. Clean lint filter regularly.

Safety Features

Child Lock: Disables controls when activated. Overheat Protection: Automatically stops heating if temperature exceeds safe limit. Door Safety Switch: Stops drum when door is opened.

Care & Cleaning

Unplug before cleaning. Clean lint filter after each use. Empty water tank regularly. Wipe exterior with damp cloth.

CAUTION! Do not use abrasive cleaners. Ensure dryer is unplugged during maintenance.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Door not closed/power	Close door securely; check power outlet; ensure child lock is off.
No heat	Program selection/overheat	Select program with heat; check if overheat protection activated (wait 30 min).
Long drying times	Lint filter/overload	Clean lint filter; reduce load size; check room temperature.
Water tank full indicator	Tank full	Empty water tank; ensure properly inserted.
Unusual noise	Foreign objects/installation	Check drum for objects; ensure dryer is level; transit bolts removed.

Reset: Unplug for 5 minutes, then restart.

Service: 1-877-232-5636; www.beko.com