Beko DVS04X20W Slimline Dishwasher Manual

The Beko DVS04X20W is a 4-place setting slimline dishwasher designed for compact kitchens, featuring energy-efficient operation, multiple wash programs, delay start, child lock, and a salt and rinse aid indicator. It operates on a standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control Panel, Spray Arms, Filters, Cutlery Basket, Salt Container, Rinse Aid Dispenser, Drain Hose, Water Inlet.

Installation

Unpack and inspect contents. Ensure location is level, near water supply, drain, and power outlet.

1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
2. Connect drain hose: Place into sink or dedicated drain pipe (min height 40 cm).
3. Level the appliance: Adjust feet to ensure dishwasher is stable and level.
4. Plug into power outlet: Use a properly grounded socket.

WARNING! Installation must be performed by a qualified technician. Ensure water and electrical connections are secure to prevent leaks or electric shock.

First-Time Setup

Before first use, prepare the dishwasher.

1. Remove transport materials: Check interior for any packing straps or foam.
2. Fill salt container: Use only dishwasher salt. Fill until water overflows, then close tightly.
3. Fill rinse aid dispenser: Open cap, fill to MAX line, close.
4. Run an empty cycle: Select the Intensive program without dishes to clean interior.
5. Set water hardness: Use the programme table to configure based on your local water hardness.

CAUTION! Only use detergents and additives specifically designed for dishwashers.

Specifications

• Type: Freestanding Slimline Dishwasher.
• Place Settings: 4 standard sets.
• Energy Class: A (Energy Efficient).
• Water Consumption: Approx. 9-11 litres per cycle (Eco program).
• Power Consumption: Approx. 0.78 kWh per cycle (Eco program).
• Programmes: Eco 50°C, Intensive 70°C, Normal 65°C, Quick 45°C, Rinse.
• Noise Level: 49 dB(A).
• Dimensions (HxWxD): 45 x 55 x 50 cm.
• Power Supply: 220-240V, 50Hz, 10A.
• Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Access controls via the front panel. Main Buttons: ON/OFF, PROGRAMME SELECTOR, DELAY START, CHILD LOCK, START/PAUSE.

Indicator Lights: Salt, Rinse Aid, Programme Progress (Wash, Rinse, Dry).

Programme Selection: Turn knob to desired programme. Delay Start: Press button, use +/- to set hours. Child Lock: Press and hold for 3 seconds to activate/deactivate. Starting: Close door, select programme, press START/PAUSE. To pause: Press START/PAUSE during cycle; press again to resume.

Loading the Dishwasher

For optimal cleaning, load correctly.

1. Scrape off large food residues; pre-rinsing is not necessary.
2. Lower Basket: Plates, pots, pans. Place facing centre, not touching.
3. Upper Basket: Cups, glasses, small bowls. Angle downward.
4. Cutlery Basket: Place knives (handles up), spoons and forks mixed.
5. Adjust Upper Basket: Lift to accommodate tall items in lower basket.
6. Ensure spray arms rotate freely and are not blocked.

Tip: Do not overload. Water and detergent must reach all surfaces.

Using Detergents & Additives

Use only dishwasher-specific products.

1. Detergent: Fill main dispenser in door. Use amount recommended on packaging based on water hardness and soil level.
2. Rinse Aid: Fill dispenser to MAX line. Adjust dosage level (1-6) via dial inside dispenser cap for streak-free drying.
3. Salt: Fill container in base of dishwasher. Ensures soft water for spotless results. Only refill when indicator light is on.
4. Combined Tablets: Can be used; place in main detergent dispenser.

WARNING! Do not use regular washing-up liquid. It will cause excessive suds and damage the appliance.

Care & Maintenance

Regular care ensures longevity and performance.

Cleaning Exterior: Wipe with damp cloth and mild detergent. Do not use abrasive cleaners.

Cleaning Interior & Filters:

1. Remove lower basket.
2. Twist and lift out filter assembly (coarse and fine).
3. Rinse under warm water to remove debris.
4. Reassemble correctly.
5. Monthly: Run a hot cycle with a dishwasher cleaner or a cup of vinegar placed in the upper basket.

Spray Arms: Check holes are not clogged; remove and rinse if necessary.

CAUTION! Unplug appliance before any maintenance. Do not use steam cleaners.

Safety Information

Read all instructions before use. This appliance is for household use only. Keep children away from detergent and open door during/after cycle (risk of hot steam). Do not sit or stand on the open door. The door should not be left open as a tripping hazard. Disconnect power before servicing. In case of malfunction, turn off water and power.

Troubleshooting

Reset: Turn appliance off and on at mains for 1 minute.

Service: For issues not resolved, contact Beko Customer Support or an authorised service agent. Do not attempt repairs yourself.