Beko DW450 Fully Integrated Dishwasher Manual

The Beko DW450 is a fully integrated dishwasher designed for seamless kitchen cabinetry, featuring energy-efficient A++ rating, multiple wash programs, delay start, child lock, and half-load option. It operates on 220-240V, 50Hz power supply. Below are key sections covering safety, features, installation, daily use, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fully integrated front panel, electronic control panel, upper and lower spray arms, cutlery basket, detergent dispenser, salt container, rinse aid dispenser.

Feature	Description
Energy Rating	A++ for high energy efficiency
Wash Programs	7 programs including Eco, Intensive, Quick
Capacity	13 place settings
Delay Start	1-24 hours delay timer
Child Lock	Prevents accidental program changes
Half Load Option	Reduces water and energy for smaller loads
Water Softener	Built-in with salt container
Display	LED digital display with remaining time
Noise Level	49 dB (quiet operation)
Dimensions (HxWxD)	815 x 598 x 550 mm

Installation

Unpack and inspect contents. Ensure installation space meets requirements.

Position dishwasher: Slide into kitchen cabinet opening, ensuring level placement.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drainage: Secure drain hose to sink or waste pipe with anti-siphon loop.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Secure to cabinet: Use mounting brackets to fix dishwasher to adjacent cabinets.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before first use.

First-Time Setup

Before first wash, prepare the dishwasher.

Remove transport materials: Check interior for shipping bolts and remove if present.
Fill salt container: Unscrew cap, add 1kg of dishwasher salt, then refill with water.
Fill rinse aid: Open dispenser, fill to MAX line with rinse aid liquid.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt in salt container. Do not use table salt.

Specifications

Model: Beko DW450
Type: Fully Integrated Dishwasher
Energy Class: A++
Water Consumption: 10 liters per cycle (Eco program)
Power Consumption: 0.95 kWh per cycle (Eco program)
Programs: 7 (Eco, Intensive, Normal, Quick, Glass, Rinse, Soak)
Delay Timer: 1-24 hours
Drying System: Condensation drying
Power Supply: 220-240V, 50Hz
Weight: 42 kg

Controls and Settings

Control panel located on top of door when opened.

Buttons: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display shows: Selected program, remaining time, delay timer, error codes.

Settings menu (hold PROGRAM for 3 seconds): Water hardness (H1-H5), rinse aid dosage (1-5), acoustic signal on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Lower basket: Plates, large bowls, pots (face center, avoid blocking spray arms).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Knives, forks, spoons (handles down, mixed types).
Detergent: Use tablets/powder in dispenser; add pre-wash detergent if heavily soiled.
Do not overload: Ensure water can reach all surfaces.

Tip: Remove large food residues before loading. Place delicate items in upper basket.

Wash Programs

Select program based on soil level and dish type.

Program	Temperature	Duration	Best For
Eco	50°C	3:15 hours	Daily use, energy saving
Intensive	70°C	2:45 hours	Heavily soiled pots/pans
Normal	65°C	2:30 hours	Standard daily dishes
Quick	45°C	0:30 hours	Lightly soiled, quick wash
Glass	40°C	1:45 hours	Delicate glassware
Rinse	Cold	0:15 hours	Rinse only, no detergent
Soak	35°C	1:00 hour	Pre-wash for dried food

Note: Half Load option reduces time/consumption by 30% when loading only one basket.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist and lift filter assembly, rinse under water weekly.
Clean spray arms: Check for blockages, remove debris from holes monthly.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months.
Exterior: Wipe control panel and door with damp cloth; avoid abrasive cleaners.
Check seals: Clean door gasket to prevent leaks.

CAUTION! Unplug before maintenance. Do not use sharp objects to clean spray arms.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to disable controls.

Overflow protection: Float switch stops water intake if detected.

Leak protection: Base pan collects small leaks; automatic shut-off for major leaks.

Door safety: Dishwasher stops if door opened during operation.

Regulatory Information

CE marked: Complies with European Directives. WEEE symbol: Do not dispose with household waste. For disposal, contact local recycling center. Energy label according to EU regulation 1059/2010. Manufacturer: Beko PLC, UK. For support, visit www.beko.co.uk or contact 0333 207 9710.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check plug; ensure door closed properly; check child lock.
Poor cleaning results	Loading/detergent	Rearrange dishes; use correct detergent amount; clean filters.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure sink waste clear.
Error code E1	Water inlet issue	Check water tap; clean inlet filter; check hose.
Error code E3	Heating problem	Reset by turning off/on; if persists, call service.
Noise during operation	Spray arm/dishes	Ensure dishes not touching spray arms; remove debris.
Detergent not dissolving	Dispenser clogged	Clean dispenser compartment; use different detergent form.

Reset: Turn off at mains for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.co.uk