Beko ECWMB 81445 LW Manual

The Beko ECWMB 81445 LW is a freestanding washing machine with a 8 kg load capacity, 1400 rpm spin speed, energy rating A+++, and features including Anti-Crease, Cottons, Synthetics, Delicates, Wool, Quick Wash, and Allergy Care programs. It includes delay start, child lock, and imbalance control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Washing Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with program selector and display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

FeatureDescription
Capacity8 kg maximum load
Spin SpeedUp to 1400 rpm
Energy RatingA+++ (most efficient)
ProgramsCottons, Synthetics, Delicates, Wool, Quick Wash, Allergy Care
Special FunctionsAnti-Crease, Delay Start, Child Lock, Extra Rinse
DisplayLED with time remaining, cycle stage, and error codes
DoorReversible (opens left or right)
Dimensions (HxWxD)85 x 60 x 55 cm (approx.)
Water InletCold water connection (hot fill optional on some models)
Noise LevelLow noise operation (wash: 53 dB, spin: 75 dB)

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level.
  3. Connect water inlet: Attach supplied hose to cold water tap; ensure tight.
  4. Connect drain hose: Place in standpipe or sink (max height 100 cm).
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts removed to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Plug in and press Power button.
  2. Run empty wash: Select Cottons 90°C program without laundry; add a little detergent.
  3. Set preferences: Use Settings button to adjust buzzer volume, child lock, etc.
  4. Load laundry: Sort by color and fabric type; do not exceed 8 kg.
  5. Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).

CAUTION! Ensure machine is level to prevent vibration and noise.

Specifications

Controls and Settings

Control Panel: Power button, Program selector knob, Start/Pause, Delay Start, Extra Rinse, Speed/Spin adjustment, Temperature adjustment, Child Lock.

Programs: Cottons (20°C-90°C), Synthetics (cold-60°C), Delicates (cold-40°C), Wool (cold-40°C), Quick Wash (14 min), Allergy Care (thermal disinfection), Sport, Mix.

Settings: Press and hold Settings button to access buzzer volume, end of cycle signal, factory reset. Delay Start: Press Delay button to set start time (1-24 hours). Child Lock: Press and hold Child Lock for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect to cold water tap (3/4” thread). Drain: Place hose in standpipe (max 100 cm height) or over sink edge.

  1. Ensure water tap is off before connecting hose.
  2. Use only supplied hose; do not extend.
  3. Secure drain hose to prevent slipping.
  4. Check for leaks after first connection.

Tip: Use a drain hose extension kit if needed; ensure no kinks.

Using Washing Programs

Select program based on fabric type and soil level.

  1. Load laundry: Open door, load sorted items, close firmly.
  2. Add detergent: Pull drawer, add to correct compartment.
  3. Select program: Turn knob to desired program.
  4. Adjust options: Press Temperature, Spin, Extra Rinse, etc. as needed.
  5. Start: Press Start/Pause; display shows time remaining.
  6. Pause/change: Press Start/Pause to stop; wait for door lock to release (2 min).
  7. End of cycle: Buzzer sounds; remove laundry promptly to reduce creasing.

WARNING! Do not open door during wash; wait until drum stops and door lock releases.

Special Functions

Delay Start: Set wash to start later (1-24h). Child Lock: Locks controls during operation. Anti-Crease: Drum tumbles periodically after cycle to reduce wrinkles. Extra Rinse: Adds an additional rinse cycle. Imbalance Control: Automatically redistributes load if uneven.

Care & Cleaning

Clean detergent drawer monthly: Remove, rinse under tap. Clean drum: Run empty hot wash (Cottons 90°C) with drum cleaner or vinegar monthly. Clean filter: Locate at front bottom; turn drain cap slowly to release water, then remove and clean filter.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE marked; complies with EU directives. Energy label according to EU regulations. Waste disposal: Do not dispose with household waste; take to designated collection point. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower, door, child lockCheck plug, socket; ensure door closed; deactivate child lock.
No water intakeTap, hose, filterEnsure tap on; check hose for kinks; clean inlet filter.
Water doesn't drainDrain hose, pump filterCheck hose for blockages/kinks; clean pump filter.
Excessive vibration/noiseTransit bolts, leveling, loadEnsure transit bolts removed; re-level feet; redistribute load.
Error code on displayVarious faultsRefer to manual error code list; unplug for 5 min, restart.
Detergent not dispensedDrawer blockedClean detergent drawer compartments.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com

Beko ECWMB 81445 LW Manual © - All Rights Reserved 2025