Beko Pro Din29x20 Full-Size Dishwasher Manual

The Beko Pro Din29x20 is a full-size built-in dishwasher featuring 14 place settings, 7 wash programs including Intensive, Auto, Eco, and Quick cycles, adjustable upper rack, stainless steel interior, delay start timer, child lock, and energy/water efficiency ratings. It operates on 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, adjustable upper rack, cutlery basket, detergent dispenser, control panel with digital display, water inlet and drain connections.

FeatureDescription
Capacity14 place settings
Wash Programs7 programs including Intensive, Auto, Eco, Quick, Glass, Rinse, and Half Load
Adjustable Upper RackHeight adjustable for taller items
Delay Start TimerProgram start delay from 1 to 24 hours
Child LockLocks control panel during operation
Energy RatingENERGY STAR certified
Water ConsumptionApproximately 3.5 gallons per cycle (Eco program)
Drying SystemCondensation drying with fan assist
Filter SystemSelf-cleaning triple filtration
DisplayDigital display with remaining time indicator

Installation

Unpack and inspect contents. Ensure proper electrical and plumbing connections.

  1. Position dishwasher: Slide into standard 24-inch cabinet opening.
  2. Connect water supply: Attach hot water line (120°F recommended) to inlet valve.
  3. Connect drain hose: Route to sink drain or garbage disposal with high loop.
  4. Electrical connection: Plug into dedicated 120V, 15A grounded outlet.
  5. Level the unit: Adjust front leveling legs for stability.

WARNING! Installation should be performed by qualified personnel. Ensure water and electrical connections are secure before use.

First-Time Setup

After installation, prepare for first use.

  1. Remove shipping materials: Take out all interior packaging and transit bolts.
  2. Run initial rinse cycle: Add 1 cup white vinegar to detergent dispenser and run Quick program without dishes.
  3. Load detergent: Fill rinse aid dispenser and main detergent compartment.
  4. Select language: Set control panel display language if applicable.
  5. Test operation: Run Eco program with a few dishes to verify performance.

CAUTION! Do not use regular dish soap. Use only dishwasher detergent to prevent overflow.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, CHILD LOCK, START/PAUSE.

Program Options: Intensive (heavily soiled), Auto (sensor-based), Eco (energy saving), Quick (58-minute), Glass (delicate), Rinse (rinse only), Half Load (partial load).

Settings: Delay Start (1-24 hours), Child Lock (press and hold for 3 seconds), Rinse Aid indicator (refill when light is on), Salt indicator (if water softener equipped). Temperature settings vary by program.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food particles (no pre-rinsing required).
  2. Lower rack: Place plates, pots, pans facing center. Adjust rack height if needed.
  3. Upper rack: Place glasses, cups, bowls. Use fold-down tines for stemware.
  4. Cutlery basket: Mix utensils facing up/down for better cleaning.
  5. Detergent: Use recommended amount in main dispenser. Add rinse aid to designated compartment.

Tip: Avoid nesting items. Ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

  1. Intensive: 158°F, for pots, pans, heavily soiled dishes.
  2. Auto: Sensors adjust time/temperature based on soil level.
  3. Eco: Energy-efficient, longer cycle for normal soil.
  4. Quick: 58 minutes, light soil, no drying.
  5. Glass: Lower temperature for delicate items.
  6. Rinse: Rinse only, no detergent needed.
  7. Half Load: Reduced water for partial loads.

Press START/PAUSE to begin. Delay Start can be set before starting. Child Lock prevents accidental changes during cycle.

Care & Maintenance

Regular maintenance ensures longevity and performance.

  1. Monthly: Clean filter system - remove lower rack, twist and lift out filter, rinse under water.
  2. Quarterly: Run empty cycle with dishwasher cleaner or 2 cups vinegar.
  3. As needed: Wipe door gasket and interior with damp cloth. Clean spray arms if clogged.
  4. Check rinse aid and salt levels monthly; refill as needed.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners on stainless interior.

Regulatory Information

UL listed; complies with NSF/ANSI 184 for residential dishwashers. ENERGY STAR certified. Manufactured by Beko. For support, visit www.bekousa.com or contact 1-866-332-8456. Copyright © 2023 Beko. All rights reserved.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startDoor not closed, power issueEnsure door latched securely; check power outlet; reset circuit breaker.
Poor cleaning resultsOverloading, incorrect detergentLoad properly; use recommended detergent; clean filter; check water temperature.
Water not drainingDrain hose clogged/kinkedCheck drain hose for kinks; clean filter; ensure proper installation with high loop.
Leaking waterDoor seal damaged, overfillingCheck door gasket; ensure level installation; use correct amount of detergent.
Unusual noiseSpray arm obstruction, loose itemsCheck for utensils blocking spray arm; ensure racks properly seated.
Display shows error codeVarious system faultsConsult manual for specific error code meaning; reset by turning power off/on.

Reset: Turn power off at circuit breaker for 1 minute, then restore.

Service: 1-866-332-8456; www.bekousa.com

Beko Pro Din29x20 Full-Size Dishwasher Manual © - All Rights Reserved 2025