beko pro din29x20 manual

The Beko Pro DIN29X20 is a 29-inch built-in dishwasher with advanced cleaning technology, multiple wash programs, energy-saving features, and a stainless steel interior. It features a digital display, adjustable racks, half-load option, delay start, child lock, and rinse aid/salt indicators. Designed for standard kitchen cabinet installation (60cm width). Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stainless steel tub, upper and lower racks, cutlery basket, detergent dispenser, digital control panel, water inlet/outlet connections.

Feature	Description
Digital Display	Shows program status, time remaining, and error codes
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Half Load Option	Reduces water and energy for smaller loads
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Adjustable Upper Rack	Height adjustable for taller items
Salt & Rinse Aid Indicators	LED alerts for refilling
AquaStop	Leak protection system
Energy Rating	A++ for energy efficiency
Noise Level	46 dB (quiet operation)

Installation

Unpack and inspect contents. Ensure proper electrical and water connections.

1. Position dishwasher: Slide into 60cm cabinet opening; level using adjustable feet.
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet (10A fuse).
5. Secure to counter: Use mounting brackets to prevent tipping.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before first use.

First-Time Setup

Before first wash, prepare the dishwasher.

1. Remove transport materials: Take out all polystyrene blocks and transit bolts.
2. Fill salt dispenser: Add 1kg of dishwasher salt (first use may require water in salt chamber).
3. Fill rinse aid: Pour into designated compartment (level 3 recommended).
4. Run empty cycle: Select Intensive program without dishes to clean interior.
5. Set water hardness: Adjust setting according to local water hardness (1-5).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

• Model: Beko Pro DIN29X20
• Type: Built-in dishwasher
• Place Settings: 13 place settings standard
• Dimensions (HxWxD): 82 x 59.8 x 55 cm (installation dimensions)
• Water Consumption: 9.5 liters per cycle (Eco program)
• Power Consumption: 0.78 kWh per cycle (Eco program)
• Water Pressure: 0.03 - 1 MPa
• Voltage/Frequency: 220-240V, 50Hz
• Program Duration: 30 min (Rinse) to 180 min (Intensive)
• Warranty: 2 years parts and labor

Controls and Settings

Control panel: Power button, program selector, delay start, half load, child lock, start/pause.

Program Selection: Turn knob to select: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse (cold).

Additional Functions: Delay Start (1-24h), Half Load (for upper rack only), Extra Dry (extends drying time).

Indicator Lights: Salt (red when empty), Rinse Aid (red when empty), End (green when cycle complete).

Child Lock: Press and hold Start for 3 seconds to activate/deactivate.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

1. Scrape off large food residues (no pre-rinsing required).
2. Upper rack: Glasses, cups, saucers, small bowls (face downward).
3. Lower rack: Plates, pots, pans, large bowls (avoid blocking spray arms).
4. Cutlery basket: Knives, forks, spoons (handles down for safety).
5. Adjust upper rack: Lift to accommodate tall items like wine glasses.
6. Use detergent: Fill main dispenser with tablets/powder/gel (max 25g).

Tip: Do not overload. Ensure spray arms can rotate freely.

Wash Programs

Select program based on soil level and dish type.

Program	Temp	Duration	Best For
Auto	45-65°C	105 min	Mixed daily loads with normal soiling
Intensive	70°C	180 min	Heavily soiled pots, pans, baking dishes
Eco	50°C	180 min	Normally soiled dishes, energy saving
Quick	45°C	30 min	Lightly soiled dishes, quick refresh
Glass	40°C	90 min	Delicate glassware, crystal
Rinse	Cold	15 min	Rinsing dishes before later wash

Note: Eco program is most energy-efficient for daily use.

Care & Maintenance

Regular maintenance ensures longevity.

1. Clean filters: Remove lower basket, twist out filter assembly, rinse under water weekly.
2. Clean spray arms: Check for blockages, remove debris from holes monthly.
3. Descale: Run empty cycle with dishwasher cleaner every 2-3 months.
4. Exterior: Wipe with damp cloth; do not use abrasive cleaners.
5. Door seals: Wipe clean to prevent mold buildup.

CAUTION! Unplug before maintenance. Do not use steam cleaners.

Safety Features

Child Lock: Locks control panel. AquaStop: Leak protection with automatic water shutoff. Overflow protection: Float switch stops water if detected. Thermal cut-out: Prevents overheating. Door safety: Dishwasher stops if door opened during cycle.

Regulatory Information

CE marked: Complies with European directives. Energy label: A++ rating according to EU regulation 1059/2010. Waste electrical equipment must not be disposed with household waste. Contact local authorities for recycling. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Door not closed, no power	Ensure door latched; check power outlet; reset circuit breaker.
Poor cleaning results	Overloaded, wrong program	Load properly; select Intensive program; clean filters; use fresh detergent.
Water not draining	Drain hose blocked/kinked	Check hose for kinks; clean filter; ensure drain height correct.
Error code E1	Water inlet problem	Check water supply tap; clean inlet filter; ensure pressure adequate.
Error code E3	Water leakage detected	Check for leaks; ensure hoses connected properly; contact service.
Noise during operation	Spray arm hitting dishes	Rearrange load; check for foreign objects in spray arm.
Detergent not dissolving	Dispenser clogged	Clean dispenser; use different detergent form; ensure door closed properly.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com