Beko ProSmart Inverter Washing Machine Manual

The Beko ProSmart Inverter Washing Machine is a front-loading laundry appliance featuring ProSmart Inverter Motor technology for energy efficiency and quiet operation, multiple wash programs (Cotton, Synthetic, Delicate, Quick Wash, etc.), load capacity of 8-10 kg, spin speeds up to 1400 RPM, delay timer, child lock, anti-crease function, and self-cleaning system. It includes features like Auto Dose detergent dispensing, SteamCare, and AllergyPlus programs. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: ProSmart Inverter Motor, LED Display, Control Dial, Auto Dose Detergent Dispenser, Door Lock, Water Inlet Valves, Drain Pump Filter.

Feature	Description
ProSmart Inverter Motor	Energy-efficient, quiet, and durable direct drive motor
Auto Dose	Automatically dispenses detergent and softener based on load
SteamCare	Steam function for hygiene and reduced wrinkles
AllergyPlus	Special program to remove allergens with extra rinses
Quick Wash	30-minute program for lightly soiled loads
Delay Timer	Delay start up to 24 hours
Child Lock	Locks controls to prevent accidental changes
Anti-Crease	Reduces wrinkles by tumbling periodically after wash
Self-Cleaning	Cleans drum and tub to prevent odor buildup
Spin Speed Control	Adjustable spin speed up to 1400 RPM

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; ensure no kinks.
Level the machine: Adjust feet to prevent vibration; use spirit level.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; perform initial setup.

Run calibration: Select "Drum Clean" or "Initial Setup" program to calibrate sensors.
Set detergent in Auto Dose: Fill detergent and softener compartments; set dosage level.
Select language: Use Settings menu to choose display language (default ENGLISH).
Test run: Run a quick wash without laundry to check operation.

CAUTION! Ensure transit bolts are removed before first use to avoid damage.

Specifications

Capacity: 8-10 kg (varies by model).
Motor: ProSmart Inverter Motor.
Spin Speed: Up to 1400 RPM.
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, SteamCare, AllergyPlus, Drum Clean.
Energy Rating: A+++ (most models).
Water Supply: Cold fill (some models hot/cold).
Dimensions: Standard front-loader size (approx. 85cm H x 60cm W x 60cm D).
Power: 220-240V AC, 50Hz.
Noise Level: ≤ 50 dB (wash), ≤ 70 dB (spin).

Controls and Settings

Access via control dial and touch buttons. Display shows time, cycle stage, and options.

Control Dial: Turn to select program (Cotton, Synthetic, etc.).

Buttons: Start/Pause, Delay, Spin Speed, Temperature, Steam, Extra Rinse, Child Lock.

Settings: Temperature (cold to 90°C), Spin Speed (0-1400 RPM), Delay (1-24h), Pre-Wash, Extra Rinse. Auto Dose: Set dosage level (Low/Med/High). Special Modes: SteamCare, AllergyPlus, Quick Wash. Maintenance: Drum Clean program, Self-Cleaning reminder.

Connecting Water & Drain

Water Inlet: Connect hoses to taps and machine (red-hot, blue-cold if applicable). Drain: Place hose in standpipe (max height 1m).

Turn off taps before connecting hoses.
Use only provided hoses; replace if damaged.
Ensure drain hose is secured to prevent slipping.
Check for leaks after connections.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly; do not overload.
Add detergent: Use Auto Dose or manual compartment.
Select program: Turn dial (e.g., Cotton for normal loads).
Adjust settings: Press Temp, Spin, etc., to customize.
Start: Press Start/Pause; door locks automatically.
Pause/change: Press Start/Pause to pause; wait for door unlock.
End of cycle: Signal sounds; door unlocks after short delay.
Remove laundry promptly to reduce wrinkles.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

SteamCare: Reduces allergens and wrinkles; select Steam button. AllergyPlus: Extra rinses for sensitive skin. Delay Timer: Set start time. Child Lock: Press and hold Child Lock for 3 seconds. Anti-Crease: Tumbles periodically after wash if enabled.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; clean drain pump filter periodically to prevent blockages.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Energy label according to EU regulations. Copyright © Beko plc; trademarks of Beko. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press Start.
No water intake	Taps/hoses	Ensure taps on; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/pump	Check hose for blockages; clean drain pump filter.
Excessive vibration	Leveling/load	Re-level machine; redistribute laundry; remove transit bolts.
Error code on display	Sensor/fault	Refer to manual error code list; reset by unplugging 5 min.

Reset: Unplug for 5 minutes; plug back in.

Service: Contact authorized Beko service; www.beko.com.