beko slimline dishwasher manual

The Beko Slimline Dishwasher is a compact, energy-efficient appliance designed for smaller kitchens or households, featuring multiple wash programs, delay start, child lock, and salt/rinse aid indicators. It operates on standard 120V AC, 60Hz power. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Spray Arms, Filter System, Cutlery Basket, Detergent Dispenser, Salt Container, Rinse Aid Dispenser.

Feature	Description
Control Panel	Digital display with program selection buttons
Spray Arms	Upper and lower rotating arms for thorough cleaning
Filter System	Removable coarse and fine filters
Cutlery Basket	Top rack basket for utensils
Detergent Dispenser	Compartments for main wash and pre-wash
Salt Container	For water softening (if model has built-in softener)
Rinse Aid Dispenser	Adjustable dispenser for spot-free drying
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel during operation
Energy Saver	Eco program for reduced water and energy use

Installation

Unpack and inspect contents. Ensure location near water supply, drain, and power outlet.

Connect water supply: Attach inlet hose to cold water tap (ensure washer is off).
Connect drain hose: Place hose into sink or dedicated drain pipe (use hose clip if provided).
Level the dishwasher: Adjust feet using a wrench to ensure stability.
Plug into AC power outlet (120V, 60Hz).

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, run a wash cycle without dishes to clean interior.

Add salt (if applicable): Fill salt container with dishwasher salt (use funnel).
Fill rinse aid: Open dispenser cap, fill to MAX line, close cap.
Select language: If digital display allows, set to ENGLISH (default).
Run initial cycle: Choose Intensive or Eco program, start without dishes.

CAUTION! Use only dishwasher-specific salt and rinse aid. Do not mix with detergent.

Specifications

Type: Slimline built-under/freestanding dishwasher.
Capacity: Up to 10 standard place settings.
Programs: Intensive, Eco, Quick, Glass, Delicate, Rinse.
Water Connection: Cold water fill only.
Power Supply: 120V AC, 60Hz.
Energy Rating: Energy Star compliant (if applicable).
Dimensions (HxWxD): Approx. 85cm x 45cm x 60cm.
Noise Level: ≤ 49 dB(A).

Controls and Settings

Access programs via control panel buttons. Display shows remaining time, program stage, and alerts.

Buttons: POWER, PROGRAM SELECTION (Intensive, Eco, Quick, etc.), DELAY START, CHILD LOCK, START/PAUSE.

Settings: Water hardness adjustment (if model includes softener), rinse aid dosage (1-5), acoustic signal on/off. Programs: Intensive (70°C, heavily soiled), Eco (50°C, energy saving), Quick (30 min, lightly soiled), Glass (gentle for crystal), Delicate (for fine china), Rinse (no detergent, for postponing wash).

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues (no pre-rinsing required).
Lower rack: Place plates, pots, pans; ensure items do not block spray arms.
Upper rack: Place glasses, cups, bowls; angle downward for drainage.
Cutlery basket: Mix items (some up, some down) to prevent nesting.
Add detergent: Fill main wash compartment; use pre-wash for heavily soiled loads.

Tip: Do not overload; allow water to circulate freely.

Using Wash Programs

Select program based on soil level and dish type.

Close door firmly; ensure latch engages.
Press POWER to turn on.
Select program using PROGRAM button (display shows selection).
Optional: Set DELAY START (1-24 hours).
Press START/PAUSE to begin cycle; display shows remaining time.
Pause: Press START/PAUSE during cycle to add forgotten items.
End of cycle: Acoustic signal sounds (if enabled); door can be opened after a few minutes.

WARNING! Do not open door during hot wash phases; steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Clean filters: Remove and rinse under tap weekly.
Check spray arms: Ensure holes are not clogged; rotate freely.
Wipe door seals: Use damp cloth to remove debris.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months.
Refill salt and rinse aid: Monitor indicators on display.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to lock controls. Door Safety: Door auto-locks during wash; unlocks at end. Overflow Protection: Float switch stops water if detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Beko plc; trademarks of Arçelik A.Ş. Energy Guide: Meets DOE standards for energy efficiency. For support, visit www.bekousa.com or contact 1-877-793-5462.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug/power; ensure door closed securely; child lock off.
Poor cleaning results	Loading/detergent	Rearrange load; use correct detergent amount; clean filters.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height correct.
Leaking water	Door seal/hose	Inspect door seal for debris; tighten hose connections.
Unusual noise	Spray arm/items	Ensure spray arms rotate freely; check for loose items touching arms.

Reset: Unplug for 5 minutes, then restart.

Service: 1-877-793-5462; www.bekousa.com