Beko Tumble Dryer DTKCE80021W Manual

The Beko DTKCE80021W is a freestanding tumble dryer with 8 kg capacity, featuring a heat pump system for energy efficiency, multiple drying programs, sensor drying technology, reversible door, child lock, anti-crease function, and filter cleaning indicators. Designed for household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heat pump drying system, LED display, control panel, reversible door, lint filter, water container, and adjustable feet.

Feature	Description
Heat Pump Technology	Energy-efficient drying with lower temperature
Capacity	8 kg (dry cotton load)
Sensor Drying	Automatically detects moisture level for optimal drying
Programs	Multiple programs for different fabrics (Cotton, Synthetic, Delicate, etc.)
Reversible Door	Door can be hinged on left or right side
Child Lock	Prevents accidental program changes
Anti-Crease Function	Tumbles without heat periodically to reduce wrinkles
Filter Cleaning Indicator	LED alert when lint filter needs cleaning
Delay Start	Set drying to begin up to 24 hours later
Acoustic Signals	Audible alerts at end of cycle

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future transport.
Adjust feet: Turn feet to level the dryer; ensure it does not rock.
Choose door side: Reverse door if needed using supplied tool (refer to separate door reversal guide).
Ventilation: Ensure adequate space around dryer (minimum 5 cm sides, 10 cm rear).
Connect to power: Plug into grounded 220-240V, 50Hz socket (do not use extension cord).

WARNING! Dryer is heavy; use two people for lifting. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first use, run an empty cycle to remove any residues.

Clean lint filter: Remove and rinse under water; dry completely before replacing.
Check water container: Ensure empty and correctly inserted.
Select program: Turn program selector to "Cotton" with high heat level.
Start empty cycle: Press Start/Pause; let run for 30 minutes, then cancel.
Set preferences: Use option buttons to configure acoustic signals, child lock, etc.

CAUTION! Do not load laundry during first empty cycle. Ensure dryer is properly leveled.

Specifications

Model: DTKCE80021W
Type: Freestanding Heat Pump Tumble Dryer
Capacity: 8 kg
Energy Class: A++ (according to EU regulation)
Power Supply: 220-240V, 50Hz
Power Consumption: Approx. 2.5 kWh per full cotton cycle
Drying Programs: Cotton, Synthetic, Delicate, Wool, Quick Dry, Anti-Crease, Time Dry
Noise Level: 65 dB(A)
Dimensions (HxWxD): 85 x 60 x 62 cm
Weight: 45 kg

Controls and Settings

Control Panel: Program selector knob, LED display, Start/Pause button, Option buttons (Delay Start, Child Lock, Anti-Crease, Signal).

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, Wool, Quick 30', Time Dry, etc.). LED shows remaining time and options.

Options: Press relevant button to activate: - Delay Start: Set 1-24 hours delay (LED shows "H"). - Child Lock: Press and hold for 3 seconds to lock/unlock controls. - Anti-Crease: Activates tumbling without heat after cycle ends. - Signal: Turn end-of-cycle sound on/off.

Heat Levels: Some programs allow heat level adjustment (High, Low, Cool) via option button.

Connecting to Power

Must be connected to grounded 220-240V, 50Hz outlet.

Ensure dryer is off and unplugged before any electrical work.
Plug directly into wall socket; do not use adapters or extension cords.
Check that socket is easily accessible after installation.
Power on: After plugging in, LED may light up; dryer is now in standby.

Tip: Use dedicated circuit to avoid overloading. Consult electrician if unsure.

Operating Programs

Supports various fabrics and drying needs.

Load laundry: Do not exceed 8 kg; ensure items are spun-dried.
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Set options: Press Delay, Anti-Crease, etc. as needed.
Start: Press Start/Pause; time displays countdown.
Pause/change: Press Start/Pause to stop; turn knob to new program, then press Start.
End of cycle: Signal sounds (if enabled); "End" appears on display.
Unload: Remove laundry immediately to reduce creasing; clean lint filter.
Empty water container: After each cycle, remove and empty condensed water.

WARNING! Do not dry items contaminated with flammable substances. Check garment labels for drying instructions.

Safety Features

Child Lock: Locks control panel (hold Child Lock button 3 sec). Door Safety Switch: Stops drum when door opened. Overheat Protection: Automatically cuts heat if temperature excessive. Filter Alert: LED lights when lint filter needs cleaning.

Care & Cleaning

Unplug before cleaning. Clean exterior with damp cloth; do not use abrasive cleaners.

Lint filter: Clean after every cycle; remove, rinse under water, dry, replace.
Water container: Empty after each cycle; clean monthly with mild detergent.
Heat exchanger: Clean every 6 months (refer to manual for access instructions).
Drum: Wipe with soft cloth; leave door open after use to ventilate.

CAUTION! Do not use steam cleaners. Ensure all parts are dry before reassembly.

Regulatory Information

CE Marked: Complies with EU directives. WEEE Compliance: Do not dispose with household waste; recycle appropriately. Manufactured by Beko plc. For support, visit www.beko.com or contact local service center. Serial number located on rating plate inside door frame.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Door not closed/power	Close door firmly; check plug and power supply; ensure child lock is off.
Drying time too long	Lint filter/overload	Clean lint filter; reduce load size; check heat exchanger for blockages.
Water container full light	Container full	Empty water container; ensure properly inserted.
Unusual noise	Foreign objects/transit bolts	Check drum for coins, etc.; ensure transit bolts removed.
Error code on display	Sensor/component fault	Note code; unplug for 5 minutes, restart. If persists, contact service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service center; provide model and serial number.