beko tumble dryer dtlce70051w manual

The Beko DTLCE70051W is a 7kg capacity vented tumble dryer with a heat pump system for energy efficiency, featuring multiple drying programs, a reverse tumbling action, anti-crease function, child lock, filter cleaning indicator, and end-of-cycle signal. Designed for domestic use with a white finish. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Ventilation 7. Using Drying Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with program selector and options, lint filter, door with safety lock, heat pump system, condensate container, adjustable feet, power cord.

Feature	Description
Capacity	7kg drying capacity
Heat Pump Technology	Energy-efficient drying system
Programs	Multiple programs for different fabrics
Reverse Tumbling	Prevents tangling and ensures even drying
Anti-Crease Function	Reduces wrinkles at end of cycle
Child Lock	Prevents accidental program changes
Filter Cleaning Indicator	Alerts when lint filter needs cleaning
End-of-Cycle Signal	Audible signal when drying is complete
Door Safety Lock	Door locks during operation for safety
Adjustable Feet	For leveling the appliance

Installation

Unpack and inspect contents. Place on stable, level surface near a suitable vent outlet.

Positioning: Ensure adequate space around dryer for ventilation (minimum clearances as specified).
Leveling: Adjust feet using a spanner to ensure dryer is level.
Ventilation: Connect flexible vent hose to dryer outlet and route to external vent (not included).
Power: Plug into a grounded 220-240V AC, 50Hz outlet. Do not use an extension cord.

WARNING! Dryer is heavy; lift with care using two people. Ensure vent hose is not kinked or blocked.

First-Time Setup

Before first use, perform initial checks and setup.

Remove transit bolts: Locate and remove all transit bolts at the rear (if fitted).
Clean lint filter: Remove and rinse filter under water, dry thoroughly before replacing.
Check vent hose: Ensure secure connection to dryer and external vent.
Run empty cycle: Select a short program (e.g., Cupboard Dry) and run without laundry to remove any dust.

CAUTION! Never operate without lint filter in place. Ensure door is fully closed before starting.

Specifications

Model: DTLCE70051W
Type: Vented Tumble Dryer with Heat Pump
Capacity: 7kg
Energy Class: A++ (or as per rating label)
Programs: Cottons, Synthetics, Delicates, Quick Dry, Anti-Crease, etc.
Power Supply: 220-240V AC, 50Hz
Dimensions (HxWxD): Approximately 85cm x 60cm x 60cm
Weight: Approximately 40kg
Noise Level: ≤65 dB(A)

Controls and Settings

Control Panel: Program selector dial, Start/Pause button, Option buttons (e.g., Anti-Crease, Timer, Child Lock), Display with indicators.

Program Selection: Turn dial to select desired drying program (e.g., Cottons High Heat, Delicates Low Heat).

Options: Use respective buttons to activate Anti-Crease, set Timer delay start, or enable Child Lock (press and hold for 3 seconds).

Starting: Press Start/Pause. Display shows remaining time.

Changing Settings: Press Pause, make changes, then press Start again.

Connecting to Ventilation

Proper ventilation is crucial for efficient operation and safety.

Use only the recommended flexible vent hose (check local regulations).
Connect hose to dryer outlet at rear, securing with clamp.
Route hose to an external wall vent or window kit. Keep hose as short and straight as possible.
Ensure external vent is not obstructed (e.g., by snow, leaves).

Tip: Regularly check vent hose for lint buildup or damage. Clean if necessary.

Using Drying Programs

Select program based on fabric type and desired dryness level.

Load laundry: Do not exceed 7kg. Ensure items are suitable for tumble drying.
Select program: Turn dial (e.g., Cottons for towels/jeans, Synthetics for blends).
Set options: Press Anti-Crease if needed, or Timer for delayed start.
Start: Press Start/Pause. Door locks and drying begins.
At end: Signal sounds. Door remains locked briefly (cooling period), then unlocks.
Unload promptly to minimize creasing.
Clean lint filter after every cycle.

WARNING! Do not dry items contaminated with flammable substances (oil, alcohol, etc.). Do not overload.

Safety Features

Child Lock: Prevents accidental program changes. Enable by pressing and holding Child Lock button for 3 seconds. Door Safety Lock: Locks during operation and cooling. Overheat Protection: Automatically cuts power if temperature exceeds safe limit. Filter Cleaning Indicator: Flashes when lint filter needs cleaning.

Care & Cleaning

Unplug before cleaning. Exterior: Wipe with damp cloth. Do not use abrasive cleaners. Lint Filter: Clean after EVERY use. Remove, rinse under tap, dry, replace. Vent Hose & Outlet: Check monthly for lint blockage; clean if necessary. Condensate Container (if applicable): Empty and clean regularly.

CAUTION! Never operate without lint filter. Do not use steam or high-pressure cleaners.

Regulatory Information

Complies with relevant EU Directives and UK regulations. CE marked. This appliance is marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE). Do not dispose of with household waste. For recycling information, contact your local authority. Manufacturer: Beko plc. For support, visit www.beko.co.uk or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Door not closed/power	Ensure door is firmly closed; check plug is in socket and power is on.
Drying takes too long	Lint filter/vent blocked	Clean lint filter; check vent hose for blockages or kinks.
Noisy operation	Foreign objects/balance	Check for coins/buttons in drum; ensure load is balanced, dryer is level.
Error code on display	Various faults	Consult error code list in manual. Common: E1 - Door open; E2 - Filter blocked.
Clothes too wet after cycle	Overloaded/wrong program	Reduce load size; select a more intensive drying program.

Reset: Unplug for 5 minutes, then reconnect. If problem persists, contact service.

Service: UK: 0333 207 9710; www.beko.co.uk/support