Beko Tumble Dryer Instruction Manual

The Beko Tumble Dryer is a household appliance designed for efficient and safe drying of laundry. It features multiple drying programs, heat settings, a condenser system, lint filter, child lock, and energy-saving options. This manual provides essential information for safety, installation, operation, maintenance, and troubleshooting of your Beko tumble dryer.

1. Safety Instructions 2. Product Overview 3. Installation 4. Control Panel & Settings 5. Using Your Dryer 6. Programs & Options 7. Care & Maintenance 8. Troubleshooting 9. Technical Specifications 10. Warranty & Support

Safety Instructions

Read all instructions before use to prevent injury and damage.

Install on a stable, level, and dry surface.
Ensure proper ventilation; do not block air vents.
Connect to a grounded electrical outlet matching voltage requirements.
Do not dry items soiled with flammable substances (oil, gasoline, etc.).
Clean lint filter before every use to prevent fire risk.
Do not overload the dryer.
Keep children away from the appliance during operation.

WARNING! Never attempt to repair the dryer yourself. Contact authorized service.

Product Overview

Key components: Control panel, drum, door, lint filter, condenser unit, water container, power cord.

Part	Description
Control Panel	Program selector, start/pause button, option buttons, display
Door	Front-loading with safety lock
Lint Filter	Removable filter for collecting lint
Condenser Unit	Condenses moisture from air
Water Container	Collects condensed water (if not plumbed)
Power Cord	For electrical connection
Drum Light	Illuminates drum interior (on some models)

Installation

Unpack and inspect for damage. Remove all packaging materials.

Choose location: Well-ventilated area, away from heat sources.
Level the dryer: Adjust feet to ensure stability.
Ventilation: Ensure rear vent is not obstructed (for vented models).
Connect to power: Plug into grounded 220-240V outlet.
For condenser models: Place water container or connect drain hose.
Run empty test cycle: Select a short program to check operation.

CAUTION! Do not install behind a lockable door or in a room with high humidity.

Control Panel & Settings

Program selector: Turn to choose drying program. Display: Shows time, program, options.

Buttons: START/PAUSE, OPTIONS (e.g., Extra Dry, Iron Dry), CHILD LOCK, DELAY START.

Programs: Cottons, Synthetics, Delicates, Quick Dry, Anti-Crease. Options: Temperature selection (High, Low, Cold), Time dry (manual setting), End signal (beep on/off).

Using Your Dryer

Sort laundry: Separate by fabric type and drying requirements.
Load dryer: Do not overload; leave space for air circulation.
Clean lint filter: Before every cycle.
Select program: Turn selector to desired program.
Set options: Press OPTIONS for extra dry, time dry, etc.
Start: Press START/PAUSE button.
Unload promptly: Remove laundry when cycle ends to reduce wrinkling.
Empty water container: After each cycle (condenser models).

Tip: Check garment labels for drying instructions.

Programs & Options

Cottons: High heat for cotton, linen.
Synthetics: Medium heat for synthetic fabrics.
Delicates: Low heat for delicate items.
Quick Dry: Reduced time for lightly damp loads.
Anti-Crease: Tumbling without heat at end of cycle.
Time Dry: Manual time setting (30-120 minutes).
Extra Dry: Extended drying for heavier items.
Iron Dry: Leaves clothes slightly damp for ironing.

Note: Energy consumption varies by program.

Care & Maintenance

Regular maintenance ensures efficiency and longevity.

Clean lint filter after every cycle: Rinse under water if needed.
Clean condenser unit monthly (condenser models): Remove and rinse.
Check and clean air vents regularly.
Wipe exterior with damp cloth; do not use abrasive cleaners.
Inspect power cord for damage.
Descale if in hard water area (follow manual instructions).

CAUTION! Unplug dryer before any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Door not closed, power issue	Close door firmly; check plug and power supply.
No heat	Program setting, heater fault	Select program with heat; contact service if persists.
Clothes too damp	Overloaded, lint filter clogged	Reduce load; clean lint filter; select longer program.
Unusual noise	Foreign object in drum, unbalanced load	Check drum for objects; redistribute load.
Error code on display	Various faults	Refer to error code list in manual; reset or call service.

Reset: Unplug for 5 minutes, then restart.

Technical Specifications

Model: Beko Tumble Dryer (specific model number on rating plate).
Capacity: 7 kg (typical).
Power Supply: 220-240V, 50Hz.
Power Consumption: Varies by program (see energy label).
Dimensions (HxWxD): Approx. 85 x 60 x 60 cm.
Weight: Approx. 35 kg.
Drying Technology: Condenser (or vented, depending on model).
Programs: 10+ drying programs.
Noise Level: < 70 dB(A).

Warranty & Support

Beko provides a standard warranty covering parts and labor for manufacturing defects. Register your product online for extended benefits.

Support: For assistance, consult the manual, visit www.beko.com, or contact customer service at 1-800-237-5361.

Spare Parts: Use only genuine Beko spare parts.