Beko Washer Dryer Instruction Manual

The Beko Washer Dryer is a combination washing and drying appliance designed for home use, featuring multiple wash programs, drying cycles, energy-efficient operation, child lock, delay start, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control Panel, Detergent Drawer, Drum, Door, Water Inlet Valves, Drain Pump, Filter, Power Cord.

Installation

Unpack and inspect contents. Place on level floor.

1. Remove transit bolts: Use spanner to remove bolts at rear.
2. Connect water supply: Attach hoses to hot and cold water taps (if applicable).
3. Connect drainage: Place drain hose into standpipe or sink.
4. Level the appliance: Adjust feet to ensure machine is stable.
5. Plug into power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on the washer dryer; follow initial setup steps.

1. Run a maintenance wash: Select Cotton 90°C program without laundry to clean drum.
2. Set language: Use settings menu to select preferred language.
3. Adjust default settings: Set spin speed, temperature defaults if needed.
4. Test operation: Run a short program to ensure proper function.

CAUTION! Ensure all packaging materials and transit bolts are removed before first use.

Specifications

• Capacity: 8 kg wash / 5 kg dry.
• Energy Rating: A+++ for washing, B for drying.
• Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Drying programs.
• Spin Speed: Up to 1400 rpm.
• Water Pressure: 0.5 - 10 bar.
• Power Supply: 220-240V, 50Hz.
• Dimensions (HxWxD): 85 x 60 x 60 cm.
• Noise Level: Washing: 55 dB, Drying: 65 dB.

Controls and Settings

Access settings via control panel buttons and rotary selector.

Control Panel: Power Button, Program Selector, Start/Pause, Temperature, Spin Speed, Extra Rinse, Delay Start, Child Lock.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Wool (cold-30°C), Quick Wash (30°C), Drying (Cupboard Dry, Iron Dry). Settings: Temperature selection, Spin speed adjustment, Extra rinse option, Delay start (1-24 hours), Child lock activation.

Connecting Water & Drainage

Water Inlet: Connect hoses to taps. Drainage: Place hose in standpipe.

1. Turn off water taps before connecting hoses.
2. Connect blue hose to cold water tap, red hose to hot water tap (if applicable).
3. Secure drain hose at height between 60-100 cm.
4. Check for leaks after connections.

Tip: Use hose clips to secure connections and prevent leaks.

Using Wash & Dry Programs

Supports combined wash-dry cycles and separate functions.

1. Load laundry: Open door, load items without overfilling.
2. Add detergent: Pour into correct compartment of drawer.
3. Select program: Turn selector to desired program.
4. Adjust settings: Set temperature, spin speed, extra options.
5. Start: Press Start/Pause button.
6. For drying only: Select drying program after wash completes.
7. Unload: Remove laundry promptly after cycle ends.

WARNING! Do not overload drum. Check garment labels for care instructions.

Special Functions

Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate. Delay Start: Set delay time before program starts. Extra Rinse: Adds additional rinse cycle. Quick Wash: Reduced time for lightly soiled items.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Clean filter every 3 months. Run maintenance wash every 30 cycles.

CAUTION! Do not use abrasive cleaners. Keep ventilation openings clear.

Regulatory Information

CE marked: Complies with European directives. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com