beko washer dryer manual bm3dt68342w

The Beko BM3DT68342W is a freestanding washer dryer with 8kg washing capacity and 5kg drying capacity, featuring A+++ energy rating, 1400 rpm spin speed, Anti-Crease, Fast+, and Hygiene+ programs, delay timer, child lock, and various washing/drying programs for different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, filter, water inlet valves, drain hose.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to hot/cold taps (blue for cold, red for hot).
3. Connect drain hose: Place in standpipe or sink; secure with U-bend.
4. Level the machine: Adjust feet to ensure machine is stable and does not vibrate.
5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

1. Connect power and water supply.
2. Open detergent drawer, add 100 ml of bleach (no clothes), close drawer.
3. Select Cotton program at 90°C.
4. Press Start/Pause to begin cycle; let it complete.
5. Set language if available via program selector.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

• Model: BM3DT68342W
• Type: Freestanding Washer Dryer
• Washing Capacity: 8 kg
• Drying Capacity: 5 kg
• Energy Consumption: 0.95 kWh per cycle (cotton 60°C)
• Water Consumption: 52 liters per cycle (cotton 60°C)
• Spin Speed: 1400 rpm
• Programs: 15 washing programs, 4 drying programs
• Noise: 59 dB (washing), 77 dB (spinning)
• Power Supply: 220-240 V, 50 Hz
• Max Power: 2100 W (heating)

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Option buttons (Delay, Extra Rinse, Pre-Wash), LED display.

Programs: Cotton (20°C-90°C), Synthetic (40°C-60°C), Delicate (30°C), Wool, Silk, Anti-Crease, Fast+ (14 min), Hygiene+ (removes allergens), Drying (Cupboard Dry, Iron Dry, Extra Dry).

Options: Delay Start (1-24 hours), Child Lock (press and hold Start/Pause for 3 seconds), Extra Rinse, Pre-Wash, Speed Perfect (reduces time).

Display: Shows time remaining, program stage, and selected options.

Connecting Utilities

Water: Connect hoses to taps (max pressure 1 MPa, min 0.1 MPa). Drain: Place hose at height of 60-100 cm. Power: Use grounded socket (16A).

1. Turn off water taps before connecting hoses.
2. Use only provided hoses; do not extend.
3. Ensure drain hose is not kinked.
4. Do not use extension cord for power.

Tip: Check for leaks after first connection by running a short rinse cycle.

Washing and Drying Programs

Select program based on fabric type and soil level.

1. Load clothes: Do not exceed max capacity (8 kg wash, 5 kg dry).
2. Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
3. Select program: Turn knob to desired program.
4. Select options: Press Delay, Extra Rinse, etc. as needed.
5. Start: Press Start/Pause; display shows time remaining.
6. Drying: After wash, select drying program if needed; ensure lint filter is clean.
7. End of cycle: Machine beeps; remove clothes promptly to avoid creasing.

WARNING! Do not dry rubber, foam, or plastic items. Clean lint filter after every drying cycle.

Special Functions

Anti-Crease: Reduces wrinkles by tumbling without heat after cycle. Fast+: Washes lightly soiled clothes in 14 minutes. Hygiene+: Heats water to 60°C+ to remove allergens. Child Lock: Locks control panel; press and hold Start/Pause for 3 seconds to enable/disable.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, and filter.

1. Detergent drawer: Pull out, rinse under warm water.
2. Drum: Run empty Cotton program at 90°C with detergent.
3. Filter: Turn off machine, open filter cover at front, place towel, unscrew filter, clean debris.
4. Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use steam cleaners.

Regulatory Information

CE compliant; meets EU energy labeling requirements. Waste electrical products must not be disposed of with household waste; recycle according to local regulations. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com