Beko Washer Dryer Manual

The Beko Washer Dryer is a versatile laundry appliance combining washing and drying functions in one unit. It features multiple wash programs, energy-efficient drying, child lock, delay start, and various fabric care options. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, detergent drawer, drum, filter, water inlet valves, drain hose.

Feature	Description
Wash Programs	Cotton, Synthetic, Delicate, Quick Wash, etc.
Drying Programs	Iron Dry, Cupboard Dry, Extra Dry
Capacity	Wash: up to 9kg; Dry: up to 5kg
Energy Rating	A++ for washing, B for drying
Spin Speed	Up to 1400 rpm
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Noise Level	Wash: 53 dB; Spin: 75 dB
Display	LED with time remaining indicators
Water Inlet	Cold water connection only

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap; ensure no leaks.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using wrench; check with spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight.

First-Time Setup

Before first use, run a maintenance wash.

Remove packaging materials from drum and detergent drawer.
Connect power and water; turn on tap fully.
Select "Cotton 90°C" program without laundry; add detergent to drawer.
Start cycle to clean internal components.
Set language if available via control panel.

CAUTION! Ensure transit bolts are removed to prevent damage during spin.

Specifications

Model Type: Front-loading washer dryer.
Capacity: Wash 9kg, Dry 5kg.
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Power Supply: 220-240V, 50Hz, 10A.
Water Pressure: 0.5-10 bar.
Programs: 15 wash programs, 3 drying programs.
Spin Speeds: 400-1400 rpm adjustable.
Noise: 53 dB (wash), 75 dB (spin).
Energy Consumption: 1.02 kWh per cycle (cotton, 60°C).
Weight: 70 kg.

Controls and Settings

Control Panel: Program selector, Start/Pause, Delay Start, Spin Speed, Temperature, Extra Rinse, Child Lock.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Wool, etc.).

Settings: Adjust temperature (cold to 90°C), spin speed (0-1400 rpm), delay start (1-24h). Child Lock: Press and hold Start/Pause for 3 seconds. Display: Shows time remaining, cycle stage, error codes.

Connecting Utilities

Water: Cold water inlet only. Drain: Hose to standpipe or sink. Power: Grounded socket.

Ensure water tap is fully open and hose is not kinked.
Drain hose must be between 60-100 cm high.
Use dedicated power circuit; avoid extension cords.

Tip: Check for leaks after first connection.

Operating Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by color and fabric type.
Load drum: Do not overload; leave space for movement.
Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob; adjust temperature/spin as needed.
Start: Press Start/Pause; display shows time remaining.
Drying: Select drying program after wash if needed; set dryness level.
End of cycle: Signal sounds; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during high-temperature cycles. Check pockets for objects.

Safety Features

Child Lock: Disables controls when activated. Door Lock: Automatically locks during operation. Overflow Protection: Stops water if detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run drum cleaning program every 30 cycles.

Wipe exterior with damp cloth; do not use abrasive cleaners.
Clean filter: Locate at front bottom; turn counterclockwise to remove; clear debris.
Clean door seal: Wipe with soft cloth to remove lint and residue.

CAUTION! Never use harsh chemicals; keep ventilation openings clear.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Copyright © Beko plc. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press Start/Pause.
No water intake	Tap/hose	Ensure tap is open; check hose for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Error code on display	Various faults	Consult manual error code list; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com